1.
Vertical movement of c is prevented by the support.
C点的竖向位移被支座所阻止。
2.
Study of Influence to the Vertical Displacement of Tunnel at the Bottom of Excavation in Port Land;
陆域基坑开挖对地下管道竖向位移影响研究
3.
STUDY ON PREDICATION OF EFFECTIVE PRESTRESS FOR PC BEAM BASED ON STATIC PERFORMANCE
基于竖向位移测试的PC梁有效预应力预测研究
4.
Calculation of contact stress and soil vertical displacement under dynamic compaction
强夯作用下接触应力与土体竖向位移计算
5.
The vertical displacement ??1mm is normal to the bars AB and BC and hence does not affect their length.
竖向位移?牛?mm垂直于AB和BC，故不影响它们的长度。
6.
VERTICAL SURFACE DISPLACEMENT OF AN ELASTIC HALF SPACE UNDER DYNAMIC LOADING OF STATIC RIGID DISTRIBUTION
静刚性分布脉冲荷载下弹性半空间表面竖向位移
7.
ANALYSIS OF VERTICAL DISPLACEMENT AND INNER FORCES IN BURIED PIPELINES CAUSED BY METRO TUNNELING
地铁隧道开挖引起临近地下管线竖向位移及内力分析
8.
Analysis of the top horizontal moving of vertical concrete parts under horizontal force
混凝土竖向构件在水平力下顶端水平位移分析
9.
Displacement Calculations for a Vertical Rectangle Subjected to Horizontal Loading in an Elastic Half-Space
弹性半空间内竖向矩形面上作用均布水平力的位移计算
10.
The general solution and derivative matrix formulations of axial and transverse displacement function has been established by regarding fhe axial and transverse reaction coeflicients od stratification foundation as constants respectively.
分别采用各层地基竖向、向反力系数为常数，建立轴向、向位移函数通解及导数的矩阵式。
11.
Use the Left Arrow and Right Arrow keys to move the blinking vertical line.
请使用向左和向右箭头键移动闪烁的竖线。
12.
An Method to Calculate the Frame Elastic Lateral Displacement Consider the Influence of Vertical Load;
考虑竖向荷载影响的框架层间弹性侧移计算
13.
Response of single piles to vertical excitation with pile-soil slip
竖向激励场下考虑桩土滑移的单桩动力性态
14.
drop oneself to a lower or less erect position.
某人的身体下落到一个较低或竖直向下的位置。
15.
On Technical Analysis of the Large-tonnage Vertical Resisting Compression Statical Test for the Weak Soil Ground
软弱土场地大吨位竖向抗压静载试验技术分析
16.
Influence of the transfer layer's vertical position on the anti-seismic of the large base double-tower structure
转换层竖向位置对大底盘双塔结构抗震的影响
17.
When removing or repositioning basket, lift straight up to avoid binding.
当移动或复位装置，必须竖直升起以避免东西束缚。
18.
overspeed and axial displacement trip
超速和轴向位移脱扣