1.
Study on blank expanding of flat and height unequal box
平底不等高浅盒形件的展开计算研究
2.
Finite Element Analysis of Rectangular Box Hydroforming Process and Design of Relevant Experimental Instruments;
盒形件液压成形有限元分析及实验装置设计
3.
Effect of local convex cylindrical blank-hold surface on square box part forming
局部凸柱面压料面对方盒形件成形的影响
4.
Forming limit and weld seam movement of TWBs with different thicknesses in square cup
差厚拼焊板拉深方盒形件成形极限及焊缝移动
5.
Research on formability of tailor welded blank box based on strain path
基于应变路径的拼焊板盒形件成形性能研究
6.
Orthogonal test on forming parameters of square box made of tailor rolled blanks
变截面板方盒形件成形参数的正交试验分析
7.
Research on the Key Technologies of Intelligent Deep Drawing Control for a Rectangular Box;
盒形件拉深智能化控制关键技术的研究
8.
Analysis and Control of Drawing Springback of Box Part Based on FEM;
基于有限元法的盒形件拉深回弹分析及其控制
9.
Study on Optimization of Blank Corner Dimensions of Shallow Square Boxes Without Flanges;
无凸缘低盒形件圆角区毛坯尺寸优化的研究
10.
SIMULATION AND ANALYSIS ON WRINKLING BEHAVIOR OF SQUARE BOX PART IN DEEP DRAWING BASED ON DYNAFORM
基于Dynaform的方盒形件拉深起皱情况模拟分析
11.
Real Time Prediction of BHF Control Law in Intelligent Deep Drawing for Rectangular Box
盒形件智能化拉深压边力规律的实时预测
12.
Finite element analysis of the box flowability during viscous medium drawing
盒形件粘性介质拉深过程流动性的有限元分析
13.
Study on liquid pressure loading paths of square cup in Hydro-mechanical deep drawing without draw die
盒形件无模充液拉深液压加载路径的研究
14.
Parameters identification of material properties in intelligent rectangular box deep drawing
盒形件智能化拉深过程中材料性能参数的识别
15.
Numerical Simulation of Process of Square Cup Drawing Using Tailor Welded Blanks in Hydro-mechanical Deep Drawing Without Draw Die
拼焊板盒形件无模充液拉深工艺及数值模拟
16.
Numerical Simulation and Experiment on Hydroforming of Cone-box Shaped Part with Differently Slope Side Walls;
具有不同锥度侧壁的浅锥盒形件液压成形的数值模拟与实验研究
17.
Study on the Quality and Formability of the Rectangular Part by Process Parameter
工艺参数对盒形件转角处成形性能及质量的影响研究
18.
Weld-line Movement and Factors Affecting Formability for Different Thickness Tailor-welded Blank of Square Cup
差厚拼焊板盒形件成形影响因素及焊缝移动规律