1.
Study on Controlling Phase Interface Technology in Producing Hollow Ingot Continuously by Non-sleeve Method;
无芯法连续生产空心钢锭过程中相界面控制技术初步研究
2.
overhead ingot turning and weighing machine
架空式钢锭回转称量机
3.
Studying the Control System of Hollow-Spindle & Ring-Spindle Twisting Machine;
空心锭—环锭花式捻线机控制系统的研究
4.
mould setting-and-stripping bay
钢锭模准备和脱锭跨
5.
Analysis of Metal Wall Tumor in Aollow 4Y32 Al-alloy Ingot
4Y32铝合金空心锭内壁金属瘤分析
6.
The Application of Tundish Plug Rod Blowing Argon in Vacuum Pouring of Ingot
中间包塞棒吹氩在钢锭真空浇注中的应用
7.
Spindle out- of- center with ring and lappet.
锭子偏心，与导纱钩板和钢领不在一条直线上。
8.
Numerical Simulation of Extrusion Process for BFe10-1-1 Copper Alloy Tube Adopting Hollow Ingot
采用空心锭挤压BFe10-1-1铜合金管材的数值模拟
9.
Finite element simulation of rolling lead bullion with different hollow ratio
不同空心率铅锭轧制过程的有限元模拟
10.
In bottom pouring, the molten steel is poured into a central trumpet, from where it flows through runners to the bottom of a number of ingot moulds.
下注法是把钢液浇人中心注管，钢液从中心注管通过流钢槽流到若干个钢锭模底。
11.
Rings for ring-spinning and ring-doubling frames
环锭纺和环锭捻线机钢领
12.
cable-driven ingot buggy
钢丝绳牵引的送锭车
13.
The moulds are made of cast iron.
钢锭模是用铸铁做的。
14.
reinforced concrete hollow pier
钢筋混凝土空心桥墩
15.
PRINCIPLE OF IMPROVING KILLED STEEL QUALITY BY BLOWING Ar INTO MOLDS
钢锭模内吹氩提高镇静钢质量的原理
16.
The major equipments are the ladle and the mould. a ladle is a container to hold the molten steel tapped from the steel making furnace.
主要的铸锭设备有盛钢桶和钢锭模。盛钢桶是用来盛装从炼钢炉放出的钢液的容器。
17.
Steel windows, in general, are made from hot-rolled,structural grade new billet steel.However,for double-hung windows,the principal members are cold-formed ftom new billet strip steel.
钢窗一般用新钢锭热轧结构钢制成。但上下推拉窗的主要构件要用新带钢钢锭冷加工成形。
18.
In the case of rimming steel, no or some deoxidation is carried out before casting.
沸腾钢在铸锭前不脱氧或轻度脱氧。