说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 冷轧变形
1.
Effects of Cold Rolling Reduction on Microstructure of Ti+P-IF Steel
冷轧变形量对Ti+P-IF钢微观结构的影响
2.
Effects of Cold Rolling Reductions on Microstructure of Hot Rolled Ti+P-IF Steel in Ferrite Region
冷轧变形量对铁素体区轧制Ti+P-IF钢微观组织的影响
3.
Microstructure and Properties of CP-Ti Processed by ECAP and Cold Rolling at Room Temperature;
工业纯钛室温ECAP与冷轧变形及组织性能研究
4.
The Effects of Cold Rolling Reductions on Microstructure and Texture of Ti+P-IF Steel;
冷轧变形量对Ti+P-IF钢组织和织构的影响
5.
Effect of Cold Rolling Deformation on Microstructure and Properties of Fe-15Ni-12Mn-3.5C-2.5Si Alloy
冷轧变形对Fe-15Ni-12Mn-3.5C-2.5Si合金组织及性能的影响
6.
An Investigation of Deformation Behavior and Bonding Strength of Bimetal Strip during Cold Rolling;
双金属复合材料冷轧变形行为及结合强度的研究
7.
Discussion on Prediction Accuracy of Yield Stress Model of Cold Rolling Mill
冷连轧变形抗力模型预报精度的探讨
8.
Behaviour of Thermal Deformation of Steel Cr5 for Cold Working Roll
Cr5型冷轧工作辊用钢的热变形行为
9.
Microstructure and Deformation Mechanism of Cold-Rolled TRIP800 Steel
冷轧TRIP800钢的组织性能和形变行为
10.
The Effort of Cold Rolling and Tensile Test on the Corrosion of Nickel Electrodeposited Steel;
冷轧与拉伸变形对镀镍钢带腐蚀性能的影响
11.
Study on Shape Control Characteristics for Varying Contact Intermediate Roll of 6-hi Cold Rolling Mill
六辊冷轧机变接触中间辊板形控制性能研究
12.
The variation of ring shape in cold rolling pro ce ss was analysed and the geometrical model of ring profile was developed.
分析了环件冷轧中的几何形状变化规律,提出了冷轧中环件轮廓形状的几何模型。
13.
Microstructure of Deformation and Recrystallization of Nickel Single Crystal and Columnar Grain Crystal during Cold Drawing and Rolling;
镍单晶和柱状晶的冷拔和冷轧形变组织及再结晶研究
14.
Plastic deformation heat and friction heat are the two principle factors which caused the temperature rise of cold rolled thin plate.
冷轧时轧件塑性变形热和摩擦热是导致轧件温度升高的两个主要原因。
15.
EVOLUTIONS OF GRAIN ORIENTATION AND DISLOCATION BOUNDARY IN AA1050 ALUMINUM ALLOY DURING COLD ROLLING FROM LOW TO MEDIUM STRAINS
中低应变量冷轧AA1050铝合金中晶粒取向与形变位错界面的演变
16.
Study on the Evolution of Microstructure of Non-Quenched and Tempered Steel Shafts in the Course of Cooling after Three Rool Cross-Wedge Rooling
非调质钢空心轴三辊楔横轧热成形后冷却相变研究
17.
The grain boundary character distributions in annealed 304 stainless steel at high and low temperature after slight cold-rolling
小形变冷轧304不锈钢高温和低温退火晶界特征分布研究
18.
GRAIN BOUNDARY CHARACTER DISTRIBUTIONS OF PURE COPPER ANNEALED AT ELEVATED TEMPERATURE AFTER COLD ROLLED WITH VARIED STRAIN
不同变形量冷轧工业纯铜高温退火晶界特征分布研究