1.
Study on the Content of Retained Austenite ADI
奥－贝球铁中残余奥氏体含量的研究
2.
Rietveld Full Pattern Fitting Method for Quantitative Phase Analysis of Austenite in Iron and Steel
Rietveld精修定量分析钢中残余奥氏体
3.
Microstructure and Stability of Retained Austenite in a High Al-Containing TRIP Steel
高铝TRIP钢的微观组织与残余奥氏体稳定性研究
4.
Relation between Processing and Retained Austenite Formation of Hot Rolled TRIP-aided Steels
热轧TRIP钢的加工工艺与残余奥氏体形成的关系
5.
Transformation behavior of retained austenite in TRIP steel under stress-strain
TRIP钢中残余奥氏体相变与断裂机制研究
6.
Retained austenite in steel--Quantitative determination--Method of X-ray diffractometer
GB/T8362-1987钢中残余奥氏体定量测定X射线衍射仪法
7.
Influence of the Tempering Technology on Retained Austenite and Hardness of High-Speed Steel Rolls
回火工艺对高速钢轧辊残余奥氏体和硬度的影响
8.
Effect of residual stress on yield strength of air-cooled bainitic steel
空冷贝氏体钢的残余应力对屈服强度的影响
9.
Review on the Relation between Heat Treatment and Retained Austenite Formation of Cold Rolled TRIP-aided Steels
冷轧TRIP钢的热处理与残留奥氏体形成的关系
10.
Through the processing, it becomes a kind of extremely hard, wear-resistant and dispersed ledeburite structure which consists of martensite, retained austenite and carbide phases.
表面层极硬、耐磨而弥散的莱氏体是由马氏体+残留奥氏体+碳化物相组成。
11.
ferritic-austenitic alloy steel
铁素体奥氏体合金钢
12.
residual expansion of tank volume
罐体容积残余变形值
13.
residual expansion rate of tank volume
罐体容积残余变形率
14.
Process Research on the Isothermal Quenching of Ductile Iron of Austenite and Bainite;
奥氏体贝氏体球铁等温淬火工艺研究
15.
Krupp austenitic steel
克虏伯奥氏体不锈钢
16.
austenite grainsize determination
奥氏体晶粒大小测定法
17.
Boronizing of ZG1Cr18Ni9 austenite stainless steel
ZG1Cr18Ni9奥氏体不锈钢的渗硼
18.
The Remants of Matriarchy in Qin and It Succeed in the Institutional Reform;
秦国的母系氏族残余与其变法统一的关系