1.
Tribological Properties of Ti-Ni Based Alloys Fabricated by Equal Channel Angular Extrusion Processing;
等径弯角挤压法制备的钛镍基合金的摩擦学性能研究
2.
Computer Simulation of Pure Copper during Equal Channel Angular Pressing
纯铜等径角挤压过程计算机模拟研究
3.
Softening resistance of CuCrZr alloy fabricated by equal channel angular pressing
等径角挤压制备CuCrZr合金的抗软化性能
4.
Finite element analysis of equal channel angular pressing of 6062 Al alloy
6062铝合金等径角挤压有限元模拟
5.
Finite Element Simulation of Ti-6Al-4V Alloy during Equal Channel Angular Extrusion
Ti-6Al-4V合金等径转角挤压有限元分析
6.
Design of the principles in the hydraulic system of internal high-pressure forming and equal channel angular processing equipment
内高压和等径角挤压设备液压系统原理设计
7.
Investigatinng of the Structure of Bulk Ultrafine-Grained Material Prepared by Equal Channel Angular Pressing (ECAP);
等径角挤压法制备块体超细晶材料的工艺研究
8.
Study on the Effect of Performances of Cu-Ag Alloy by ECAP
等径角挤压工艺（ECAP）对铜银合金性能影响的研究
9.
Study on Electrochemical Corrosion of Super-hard Aluminum Alloy Deformed by Equal Channel Angle Pressing
等径转角挤压的超硬铝合金的电化学腐蚀
10.
Three-dimensional coupled thermo-mechanical FEM analysis of TC4 alloy during ECAP
TC4合金等径角挤压三维热力耦合有限元分析
11.
Influence of Process Routes on Strain Homogeneity During Equal Channel Angular Pressing
工艺路线对等径角挤压变形均匀性的影响
12.
Development of research on microstructures and properties of magnesium alloys processed by equal channel angular extrusion
等径角挤压镁合金组织和性能研究的新进展
13.
A New Near Equal Channel Angular Extrusion Design and Relative Finite Element Analysis
新型近等径转角挤压设计及其有限元分析
14.
Study on the Materials Flowing and Deformation Behavior by Equal Channel Angular Pressing(ECAP)
等径角挤压过程中材料的流变行为研究
15.
Tensile and Fracture Behaviors of Al-4%Mg-0.3%Ce Alloy by Equal Channel Angular Pressing
等径角挤压Al-4%Mg-0.3%Ce合金的拉伸及断裂行为
16.
Study on preparation of ultra-fine grained CNTs/AZ31 alloy composites by equal channel angular pressing
等径角挤压制备超细晶CNTs/AZ31镁基复合材料研究
17.
Evolution of precipitates in Al-Cu alloy subjected to equal-channel angular pressing
Al-Cu合金析出相在等径角挤压中的演变
18.
Research on the Making of Semi-Solid Billet of AZ91D Magnesium Alloy by Direct Extrusion-ECAP;
正挤压—等径道弯曲制备AZ91D镁合金半固态坯料研究