1.
The Research of Welding Arc Physical Characteristic in Hyperbaric TIG Welding;
干式高压TIG焊接电弧物理特性的研究
2.
Characteristic of energy distribution at anode and cathode on AC TIG welding arc
交流TIG焊接电弧两极能量的分布特征
3.
Research on TIG welding arc with numerical simulation by using ANSYS
基于ANSYS的TIG焊接电弧数值模拟研究
4.
Welding arc and droplet transfer control of VP PMIG
VP PMIG焊接电弧及熔滴过渡控制
5.
MMA (Manual Metal Arc)
人工金属电弧焊接法
6.
Arc Welding of Ti_3AlC_2 Ceramic to Cu Alloy
Ti_3AlC_2与Cu合金的电弧焊接
7.
Realization of Ultra-narrow Gap Welding with Flux Strips Constraining Arc;
焊剂带约束电弧超窄间隙焊接的实现
8.
Arc Characteristic and the Development of Flux Bands in Ultra-narrow Gap Welding
超窄间隙焊接焊剂带研制及电弧特性
9.
Constricted Arc by Flux Strips Applied to Ultra-narrow Gap Welding
焊剂带约束电弧用于超窄间隙的焊接
10.
The Application of the Broken Wire Submerged Arc Weldng in the Infall Trash Screen of the Three Gorges Project
碎焊丝埋弧焊在三峡电站拦污栅焊接上的应用
11.
The Welding Experimentation of 12Cr1MoVG Tube Platen and Analysis of Manual Arc Welding Cracks
膜式窄节距12Cr1MoVG管屏埋弧焊接试验及手工电弧焊补焊裂纹分析
12.
Fundamental Research on Laser-MIG Hybrid Welding and Its Application;
激光—MIG电弧复合焊接基础研究及应用
13.
Laser-Arc Hybrid Welding of 616 Armour Steels;
616装甲钢激光电弧复合焊接技术研究
14.
The Study of Lap Welding Based on Mobile Robot with Rotating Arc Sensor
移动机器人旋转电弧传感搭接焊研究
15.
Study on Physical Characteristics and Welding Process in Ultrasonic-TIG
超声-TIG电弧物理特性及焊接工艺研究
16.
Study on Arc Welding of Ti_3AlC_2 Ceramic and Cu(Mg) Alloy
Ti_3AlC_2陶瓷与Cu(Mg)合金的电弧焊接研究
17.
The study on low-power YAG laser-MAG arc hybrid welding
低功率YAG激光-MAG电弧复合焊接的研究
18.
Safety requirements for arc welding equipment--Part 1: Welding power sources
GB15579-1995弧焊设备安全要求第1部分:焊接电源