1.
Study on Effect of Milling Parameters on Milling Force in High-speeding Milling of LF21 Aluminum Alloy
高速铣削LF21铝合金铣削参数对铣削力影响规律的研究
2.
Milling Force Modeling, Simulation and Experimental Study of High Speed Milling;
高速铣削过程铣削力建模与仿真及实验研究
3.
Study on the Machining Mechanism and Parameters Optimization during High Speed Milling of Titanium Alloys
钛合金高速铣削加工机理及铣削参数优化研究
4.
Research on the Cutting Tool Technology in High-speed Milling
高速铣削刀具在高速切削加工中的应用
5.
Research on Cutting Force and Surface Roughness of High-speed Ball-end Milling;
球头铣刀高速铣削力及加工表面粗糙度的研究
6.
Mechanism and Process in High Speed Milling Hardened Steel with Micro-End Mill;
小直径铣刀高速铣削淬硬钢机理及工艺研究
7.
Investigation of High-peed Milling of Hardened Cr12 Die Steel by Ball End Mills
球头铣刀高速铣削淬硬Cr12模具钢的研究
8.
Research on Selection of Optimal Cutting Parameters in High-speed Milling of Thin-walled Al-alloy Workpiece;
铝合金薄壁件高速铣削加工工艺优化
9.
Development of the Prediction Software and Experimental Investigation on High Speed Milling Force;
高速铣削力预测软件开发与实验研究
10.
A Study on Cutting Rules and Application of High Speed Milling NAK80;
NAK80材料高速铣削机理及应用研究
11.
Simulation and Experimental Study on Surface Profiles Machined by High-speed Milling;
高速铣削表面形貌的仿真与实验研究
12.
Research on the Intelligent Process Decision Technique for High-speed Milling of Die;
模具高速铣削智能工艺决策技术研究
13.
MasterCAM X Based on High-speed Multi-axis Milling;
基于MasterCAM X的多轴高速铣削加工
14.
Pocket tool path optimization in high speed milling;
型腔高速铣削加工刀具轨迹优化研究
15.
The Optimum Strategy for the Production of Toolpath in High-speed Mill;
高速铣削时生成刀具路径的优化策略
16.
Study on the Tool Wear Mechanism and Tool Life for High-Speed Milling Titanium Alloy Ti6Al4V
高速铣削钛合金Ti6Al4V的刀具磨损研究
17.
Tool Path Planning for High Speed Milling of Free-form Surface with Toroidal Cutter
环形刀具高速铣削自由曲面轨迹规划
18.
Theory and Experimental Study on High Speed Milling Titanium Alloy
钛合金TC4高速铣削的理论和实验研究