1.
mould setting-and-stripping bay
钢锭模准备和脱锭跨
2.
The moulds are made of cast iron.
钢锭模是用铸铁做的。
3.
overhead ingot turning and weighing machine
架空式钢锭回转称量机
4.
PRINCIPLE OF IMPROVING KILLED STEEL QUALITY BY BLOWING Ar INTO MOLDS
钢锭模内吹氩提高镇静钢质量的原理
5.
The major equipments are the ladle and the mould. a ladle is a container to hold the molten steel tapped from the steel making furnace.
主要的铸锭设备有盛钢桶和钢锭模。盛钢桶是用来盛装从炼钢炉放出的钢液的容器。
6.
Steel windows, in general, are made from hot-rolled,structural grade new billet steel.However,for double-hung windows,the principal members are cold-formed ftom new billet strip steel.
钢窗一般用新钢锭热轧结构钢制成。但上下推拉窗的主要构件要用新带钢钢锭冷加工成形。
7.
QUANTITATIVE ANALYSIS OF BENEFITS OF CHARGING TEMPERATURE OF STEEL INGOT OF SOAKING PIT
均热炉钢锭装炉温度效益的定量分析
8.
The Analyzed for the Processing Way to Product Heavy Plate by Ingot
采用钢锭生产特厚板工艺方案的探讨
9.
Generally it goes through two stages to convert steel ingots into rolled steels by rolling.
一般说来，把钢锭轧制成钢材要经过两个阶段。
10.
The molten metal may enter the ingot mould in two ways: from the top and from the bottom.
钢液注入钢锭模可采用两种方式:上注和下注。
11.
The Comparative Advantages of Ingot Casting Production During the Special Steels and Large Steel Ingot Production
模铸在大钢锭及特殊钢生产方面的比较优势
12.
Surface pinholes caused by gas formed at the mould surface.
因钢锭模表面生成气体而形成的表面针孔。
13.
Mathematical Model of the Heat Transfer and Optimization of Cap Section Design in Killed-Steel Ingot
镇静钢锭热过程数学模拟及帽口优化设计
14.
THERMAL STUDY ON THE STEEL SOLIDIFICATION PROCESS IN THE HOT-TOP OF 610 TYPE INGOT MOULD
610型镇静钢锭帽口凝固过程的热工研究
15.
Numerical Simulation for Temperature Field of Forging Ingot Solidification Process and Application;
锻造用钢锭凝固过程温度场数值模拟及其应用
16.
Research and Application on Intellectual Control System of Steel Ingot Tong Crane;
钢锭钳式吊智能控制系统的研究与应用
17.
Coupled Numerical Simulation of Solidification Transport Behaviours in Electromagnetic Continuous Casting of Steel Ingots;
电磁场下钢锭连铸凝固传输行为耦合数值模拟
18.
Rings for ring-spinning and ring-doubling frames
环锭纺和环锭捻线机钢领