1.
Lower to note the pressure of mold, reduce to model and protect to press time.
降低注塑压力，减少成型和保压时间。
2.
A holding pressure unit allows the pre-plasticizer or a reciprocating screw to plasticize during the long holding time.
保压装置使预熔器或往复螺杆在冗长的保压时间内加料。
3.
I want the maximum amount of free disk space available at all times. Compress my files whenever I save them.
希望磁盘随时处于最大可用空间状态。保存文件时就将其压缩。
4.
Using adjacency list to save topology structure in power flow calculation, the calculation time is greatly reduced.
用邻接表保存中压配电网的拓扑结构,大大缩短了潮流的计算时间。
5.
Air pressure braking, the adhesive tape could stop instant when stop the machine, to make sure accuracy of the length.
气压式刹车，停机时可瞬间将胶带停止，保证长度准确。
6.
Application of Plate Theory in Predicting Retention Times of Programmed-Temperature Gas Chromatography under Constant Pressure Mode
塔板理论预测恒压模式下程序升温气相色谱保留时间
7.
Response Time and Safe Distance Determining of the Photoelectric Safety Device Equipped of Press Machine
压力机光电式安全保护装置响应时间和安全距离测试技术
8.
voltage-sawtooth time modulator
锯齿形电压时间调制器
9.
P-V-T-t technique
压力-容积-温度-时间法
10.
pressure-log time curve
压力-对数时间曲线
11.
discharge voltage time curve
放电电压 时间曲线
12.
chamber pressure versus duration curve
燃烧室压力-时间曲线
13.
pressure-time plot
压力-时间关系曲线图
14.
TICOSS (Time Compression Single-sideband System)
时间压缩式单边带系统
15.
After upgrading the drive, you can use DriveSpace's enhanced compression methods to maintain free space while you work.
升级驱动器后，您可使用“磁盘空间管理”增强的压缩方式，这样可以在您工作时保持可用空间。
16.
Plastic shrinks during cooling. Holding packs more material in to take up the shrunk space so the preforms are without sink marks.
在冷却时间内，塑料不断收缩，而保压填补收缩了的空间，使瓶坯饱满，不会下陷。
17.
Scheduled meetings and kept supervisor's calendar.
排会议时间，及保持上司的时间表正确。
18.
Keep: Until space needed (for this series)
保留时间: 至需要空间时(对于此系列)