1.
Study on casing load in a casing-stratum system by elastoplastic theory
套管-地层系统套管载荷的弹塑性理论分析
2.
A Research on Load Analysis & Optimized Design of Casing Strings in Oil & Gas Wells;
油气井套管柱载荷分析及优化设计研究
3.
Research on Collapse Strength of Oil Casing under Non-uniform Loads
非均布载荷下石油套管抗挤强度问题研究
4.
Estimation on Multi-Swell Head Expansion Load of Damaged Natural Gas Well
多胀头膨胀天然气井套管修复载荷估算
5.
Collapsing Strength Analysis of Extra-heavy Wall Casing Under Nonuniform Loads
特厚壁套管在非均载荷下的抗挤强度分析
6.
Casing load creep test under gypsum formation and its numerical simulation analysis
盐岩地层套管蠕变荷载试验及其数值分析
7.
Finite Elemtnt Analysis of Cable-Stayed Bridge under Static and Wind Loadings;
静载荷与风载荷作用下的斜拉管桥有限元分析
8.
Analysis on Dynamic Response and Extreme Loads of Buried Gas Pipeline Under Blast Loading
爆炸载荷对埋地输气管道的动力响应和极限载荷分析
9.
All of the load is transmitted to the straining sensing tube.
全部载荷都传递到应变传感管上。
10.
Limit Load Calculation and Risk Assessment of Buried Pipe;
埋地管道的极限载荷计算与风险评价
11.
Research on Complete Test of Steel Tubular Tied Rigid Bar Arch Bridge;
下承式钢管混凝土拱桥荷载试验研究
12.
Study on Inelastic Yield Load of Concrete Filled Steel Tubular Columns
钢管混凝土柱的弹塑性屈曲荷载研究
13.
Plastic Limit Load Analysis of the Piping Branch Junctions with Defect Pitting Corrosion
含点蚀缺陷三通管塑性极限载荷分析
14.
Stress analysis of pipeline subject to surface load
地面占压荷载作用下的管道应力分析
15.
Numerical Simulation on the Unidirectional Extruding Capacity of Downhole Casing
井下套管单向挤压承载能力数值模拟
16.
The pivot and race surfaces were true surface of revolution and were correctly centred when no load was applied.
轴枢和套圈的表面是准确的旋转表面，并在未施加载荷正确对中。
17.
Three-dimensional finite element analysis of stress distribution about abutments periodontal membranes of separated removable partial denture and conical telescope
垂直载荷下分割式可摘局部义齿与套筒冠义齿的有限元分析
18.
Nozzle Loads Optimizing of Inlet Primary Loop Piping in China Advanced Research Reactor
中国先进研究堆主回路进堆管系接管载荷优化