1.
Main products include cast iron shots. cast steel shots, steel wire cut shots and stainless steel shots etc.
主要生产抛喷丸用铸铁丸、碳丸、钢丸、丝切丸、锈钢弹丸。
2.
Study on Apparent Fatigue Limit of Shot Peened Specimens and Optimization of Shot Peening Technology;
喷丸件表象疲劳极限及喷丸工艺优化研究
3.
COMPARATIVE ANALYSIS OF ABRASIVE FOR SHOT BLASTING STEEL STRUCTURE
钢结构抛丸(喷丸)清理用金属磨料的对比分析
4.
Study on the Ervin Life of Low Carbon Cast Steel Shot
抛喷丸清理用低碳铸钢丸ERVIN循环寿命的研究
5.
Comparison between Steel Shots and Glass Shots in Shot Peening of Crankshaft Fillets
用铸钢丸和玻璃丸对曲轴圆角喷丸强化的对比分析
6.
And when shot peening treater, the fatigue strength of the chian will improve 12.3%.
经喷丸处理链条疲劳强度可提高12.3％。
7.
Study on the Influence of Polishing after Shot Peening on 300M Steel;
300M钢喷丸强化工艺中打磨问题的研究
8.
FEA on Surface Shot Peening to Strengthen Railway Vehicle Bodywork;
车体钢结构表面喷丸强化有限元分析
9.
The Infuences of Material Hardness on Shot Peening Strengthing Treatment;
材料硬度对喷丸组织强化效果的影响
10.
Directional Solidification γ-TiAl Shot Peening Process
定向凝固γ-TiAl板坯喷丸工艺研究
11.
Surface Nanocrystallization of 7050 Aluminium Alloy by Added-Pressure Shot Peening
7050铝合金的表面增压喷丸纳米化
12.
Effect of Shot Peening on Tensile Properties of TiAl Alloys
喷丸处理对TiAl合金拉伸性能的影响
13.
Effect of Shot Peening Treatment on the Performance of 18Cr2Ni4WA Steel
喷丸强化对18Cr2Ni4WA渗碳钢性能的影响
14.
SURFACE CHARACTERISTICS OF 10Ni3MnCuAl STEEL BY SHOT PEENING
喷丸强化10Ni3MnCuAl钢的表面性能(英文)
15.
Research on Blasting Cleaning Line of Cylinder Head for 4JB1 Engine
4JB1发动机缸盖内腔喷丸清理线的研究
16.
Effect of High-energy Shot Peening Time on Fatigue Performance of TC4 Alloy
高能喷丸时间对TC4疲劳性能的影响
17.
Self-nanocrystallized mechanism for 0Cr18Ni9Ti by means of high energy shot peening
高能喷丸0Cr18Ni9Ti不锈钢自纳米化机理
18.
Simulation of controlled shot peening process based on ANSYS/LS-DYNA
基于ANSYS/LS-DYNA的受控喷丸工艺过程仿真