1.
powder metal moulding press
粉末金属成型压力机
2.
In this paper, the effect of molding pressure on the strength and hydrochloric acid stability of autoclaved lime_stone sand brick is studied.
研究成型压力对蒸压灰砂砖抗压强度和耐盐酸腐蚀能力的影响 .
3.
The Study on Biomass Solidifying Pressure and Mathematical Model;
生物质致密成型压力及数学模型的研究
4.
Study on the Effect of Molding Pressure on Texturing of Bismuth Titanate Ceramic
成型压力对钛酸铋陶瓷织构化影响的研究
5.
Influences of Glass Particle-sizes and Shaping Pressures on Performance of Glass-c eramics from Blast Furnace Slag
原料粒度及成型压力对微晶玻璃性能的影响
6.
EFFECT OF FORMING PRESSURE ON THE PROPERTIES OF QUARTZ SAND FIRED BRICK BY ISOSTATIC COMPACTION
等静压成型压力对石英砂烧结砖性能的影响研究
7.
Study on the Relation between Percentage of Moisture of Chopped Corn Stalks and the Force of Room Temperature Compression
玉米秸秆含水率与常温压缩成型压力之间关系的研究
8.
THE INFLUENCE OF MOLDING PRESSURE IN AUTOCLAVE TECHNICS ON TEMPERATURE FIELD OF FRAME TOOLING
热压罐工艺的成型压力对框架式模具温度场的影响
9.
THE INFLUENCE OF FORMING PRESSURE AND FIRING TEMPERATURE ON PRODUCING CLOSED POROSITY CERAMICS USING SOLID RESIDUE AND TAILINGS
成型压力和烧成温度对利用废渣和尾矿制备闭孔发泡陶瓷的影响
10.
Lower to note the pressure of mold, reduce to model and protect to press time.
降低注塑压力，减少成型和保压时间。
11.
Optimization of injection molding packing pressure curve based on ActiveX and MPI
基于ActiveX和MPI优化注射成型保压压力
12.
press sth into shape flatten,smooth or shape sth by pushing against it
压平某物;施加压力使某物平整;将某物压制成型.
13.
Water Hydraulic Proportional Pressure Control for Cavity-Filling Process of Water-Assisted Injection Molding
水辅成型充模流动的纯水液压比例压力控制
14.
OPTIMIZATION OF PRESSURED SHELL STRUCTURE DESIGN FOR LARGE SCALE AMMONIA CONVERTER
大型氨合成塔压力外壳结构设计优化
15.
The simulated pressures for both ICM and CIM show good coincidence with those obtained from cavity pressure measurements.
传统射出成型与射出压缩成型在压力的模拟上，与实际量测之压力一致。
16.
Vertical Bearing Capacity Behavior of Roll Forming Screw Pile;
滚压成型螺纹灌注桩竖向承载力性能研究
17.
The Research on Mechanics Regulation of the Accumulator Electrode Precisely Figuration;
蓄电池外电极精密挤压成型力学规律研究
18.
Study on Attenuation of Vibration Phenomenon in Pulsating-Pressure Induced Injection Molding
动态注射成型中脉动压力衰减程度的研究