1.
Study on Simulation of Fluid Danymic in Stuctuerd Packed Tower;
规整填料塔内流体力学行为模拟研究
2.
PTFE Lining Graphite Packing Column Assembly Technology Resolution
PTFE内衬石墨填料塔安装技术解析
3.
The boundary conditions for the liquid distribution problem of structured packed columns were proposed.
提出了干傻事填料塔液体分布问题的边界条件。
4.
Treatment of Wastewater Containing Heavy Metal Ions by Electro-Biofilm Technique in Packed Column;
电—生物膜填料塔处理含重金属离子的废水
5.
Study on Elimination of Sulfur Hydrogen Odor at Middle and Low Concentration by Using A Bio-Membrane;
生物膜填料塔净化中低浓度硫化氢臭气的研究
6.
Research on Transfer Function of the Packed Tower with New Liquid Redistributors;
新型液体再分布器填料塔传质性能研究
7.
Experimental study on liquid-liquid cocurrent evaporation in packed column
填料塔中二液相并流蒸发过程的实验研究
8.
Treatment of Dyeing Effluent by Coupling Ultrasonic Field with Aerated Bio-Packing Tower
超声场耦合曝气生物填料塔处理印染废水
9.
Degrading Low Concentration Chlorobenzene in Wastewater by Aerobic Bio-packing Tower
低浓度氯苯废水在曝气生物填料塔中的降解
10.
The coke oven gas, free of ammonia, is passed through two packed towers through which oil is continuously pumped.
经过脱氨处理的焦炉气,被送往两个填料塔,同时把油连续泵进塔中。
11.
Operation of the ASU employing freezing process with reversing heat exchangers after the upper column being transformed into the packed column
切换冻结流程空分设备上塔改为填料塔后的操作
12.
The trough type liquid distributor is the main part of packing tower for large scale refined unit.
槽式液体分配器是大型炼油装置中填料塔中重要组成部分。
13.
STABILITY ANALYSIS OF AOB COMMUNITY IN NITRIFYING SUSPENSION FILLER TOWER
硝化悬浮填料塔中氨氧化细菌群落稳定性特征分析
14.
Intalox saddle packing
英塔洛克斯鞍形填料
15.
Applications software development of packing performance test platform for cooling tower
冷却塔填料性能测试台应用软件开发
16.
Reconstruction of Bischoff(AG-Scrubber) Packing Stuffing-boxes
比肖夫(环缝)洗涤塔填料密封箱的改造
17.
Development of Packed Extraction Column Design Software CUP-Tower
填料萃取塔设计软件CUP-Tower的开发
18.
Spray towers are used when a low pressure drop is required and the fluids involved might plug a packed bed.
当要求低的压降以及使用的流体可能填塞填料时就使用喷雾塔。