说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 等径角挤压变形
1.
Influence of Process Routes on Strain Homogeneity During Equal Channel Angular Pressing
工艺路线对等径角挤压变形均匀性的影响
2.
Deformation Behavior of Al-Ti-B Master Alloy during ECAP Process
铝-钛-硼中间合金在等径角挤压过程中的变形行为
3.
Deformation behaviors of AZ31 magnesium alloy by equal channel angular extrusion
等通道角挤压变形AZ31镁合金的变形行为
4.
Study on the Materials Flowing and Deformation Behavior by Equal Channel Angular Pressing(ECAP)
等径角挤压过程中材料的流变行为研究
5.
Evolution of precipitates in Al-Cu alloy subjected to equal-channel angular pressing
Al-Cu合金析出相在等径角挤压中的演变
6.
Deformation analysis of equal channel angular extrusion processing with acute channel angle
锐角模具等通道转角挤压过程变形分析
7.
Superplastic Behavior of Mg-Zn-Nd Alloy Subjected to Equal-Channel Angular Pressing;
等通道转角挤压Mg-Zn-Nd合金的超塑性变形行为
8.
Study on plastic deformation behavior of equal channel angular pressing process
等通道转角挤压过程塑性变形行为的研究
9.
Plastic deformation behavior of AZ61 magnesium alloy processed by equal channel angular pressing
等通道转角挤压AZ61镁合金的塑性变形行为
10.
In Situ Formation of Cr Filaments during Equal Channel Angular Pressing of Casting Cu-5.7%Cr Alloy
铸态Cu-5.7%Cr合金在等径角挤压中铬纤维的原位形成
11.
Computer Simulation of Pure Copper during Equal Channel Angular Pressing
纯铜等径角挤压过程计算机模拟研究
12.
Softening resistance of CuCrZr alloy fabricated by equal channel angular pressing
等径角挤压制备CuCrZr合金的抗软化性能
13.
Finite element analysis of equal channel angular pressing of 6062 Al alloy
6062铝合金等径角挤压有限元模拟
14.
Finite Element Simulation of Ti-6Al-4V Alloy during Equal Channel Angular Extrusion
Ti-6Al-4V合金等径转角挤压有限元分析
15.
Design of the principles in the hydraulic system of internal high-pressure forming and equal channel angular processing equipment
内高压和等径角挤压设备液压系统原理设计
16.
The Study on Preparation of Al_2O_(3sf)/AZ91D Composite and Equal Channel Angular Pressing Shear Deformation;
Al_2O_(3sf)/AZ91D复合材料制备及其等径角挤剪切变形研究
17.
Numerical Simulation and Experimental Investigation of Deformation Mechanism in Equal Channel Angular Pressing/Extrusion Process;
等通道弯角挤压(ECAP)变形机理数值模拟与实验研究
18.
Study on the Microstructure and Mechanical Properties of Magnesium Alloy by Equal Channel Angular Extrusion;
等通道角挤压变形镁合金微观组织与力学性能研究