1.
Study on the Strength for the Cylindrical Shell under the Nonuniform Loading;
圆柱壳结构在非均匀载荷作用下的强度分析
2.
ANALYSIS OF CRACKS UNDER NON-UNIFORMLY APPLIED LOADINGS IN MAGNETOELECTROELASTIC MEDIA
电磁固体非均匀载荷作用下的裂纹分析
3.
irregularly distributed load
非匀布荷载;不规则分布荷载;不均匀分布荷载;不平匀分布荷重
4.
Bending and Torsion problems of Non-homogeous Elastic Circular Ring with Variable Cross-Section under
载荷垂直于非均匀变截面弹性园环的弯扭问题
5.
ANALYSIS OF AXIALLY LOADED SINGLE PILE AND PILE GROUP IN NON-HOMOGENEOUS SOIL
轴向荷载作用下非均匀地基中单桩及群桩分析
6.
Study on Stress and Displacement Fields in Semi-Infinite Foundations under Different Loads;
不同类型荷载作用下半无限域非均匀地基的应力位移场
7.
Nonlinear Bending Analysis of Simply Supported Plates with Immovable Edges by Using the Perturbation Differential Quadrature Method;
承受均匀载荷的固定夹紧板的非线性弯曲的摄动DQ解
8.
Study of Nonhomogeneous STAP and Its Application to Airborne Radar;
机载雷达非均匀STAP方法及其应用
9.
Study on Shape of Membrane Mirror Applied by Uniform Load
均匀载荷作用下膜基反射镜面形分析和研究
10.
Research on vibro-acoustic performance of sonar dome under uniform surface load
均匀面载荷激励下潜艇透声窗振声性能研究
11.
RESEARCH ON STRESS OF SLOTTED PIPE UNDER UNIFORM DISTRIBUTION LOADING
均匀载荷作用下割缝筛管的应力分析研究
12.
On the Calculation of Capacity between two Conductors with Non - uniform Distribution Electric Charges;
电荷非均匀分布的两导体间电容的计算
13.
A Quantitative Analysis of the Capacitance between Two Conductors with Uneven Electric Charges;
电荷非均匀分布的两导体间电容的定量分析
14.
The simplest imposed conditions are those in which the loading is periodically and uniformly repeated.
最简单的加载情况是周期地、均匀而重复地施加的载荷。
15.
Study on STAP for Phased Array Airborne Radar in Nonhomogeneous Environment;
非均匀环境下的相控阵机载雷达STAP研究
16.
A Quantitative Study on Conformal Array Airborne Radar Clutter Nonstationarity
共形阵机载雷达杂波非均匀性定量研究
17.
The purpose of a foundation is to carry the load of a structure and spread it over a greater area, evenly and without undue settlement, to the ground beneath.
基础的作用是承受结构的荷载,并将其均匀地向更大更深的范围传递,避免不均匀的沉降。
18.
The presented feedrate scheduling characterized by balancing the cutting-loads in die-cavity roughing will be more significant in high speed machining.
该策略对切削力载荷要求尽量均匀的模具型腔高速加工更有意义。