1.
Investigation of Fracture Mechanism of 6061 Aluminum Alloy by Means of In-situ Observation
6061铝合金断裂机理的原位拉伸研究
2.
In-situ Observation of High-temperature Tensile Process of Fe16Mn0.6C High Manganese Steel
Fe16Mn0.6C高锰钢高温拉伸过程原位观察
3.
Study on the Dispersion Capability and Influencing Factors of Situ Bubble Stretch Dispersion Method;
原位气泡拉伸法分散能力及影响因素的研究
4.
In-situ Observation of Microstructure for Fe-Mn-C TWIP Steel During Tensile Deformation
Fe-23 MnTWIP钢拉伸变形过程中微观组织的原位观察
5.
Tensile and Wear Properties of TiC/7075 Composite Prepared by Melt in-Situ Synthesis
熔铸-原位合成TiC/7075复合材料的拉伸和磨损性能
6.
drawing machine, for stretching synthetic textiles
合成纺织原料拉伸机
7.
flexible plans.What is Ielastic returns to an original shape, form, or position, as after being stretched(
灵活的计划）。形容被拉伸后可以恢复到原形状、形态或位置的东西（
8.
Study on Preparation of PP-Nano Composites by ISBS Method and Its Mechanical Properties;
利用原位气泡拉伸法制备PP纳米复合材料及力学性能的研究
9.
Re-Aggregation of Antifoaming Process in Polymer-Based Nano-Composite Prepared by in Situ Bubble Stretching (ISBS) Method;
原位气泡拉伸法（ISBS）分散规律及消泡再团聚过程研究
10.
In-situ observation for the formation and propagation of cracks in YAl_(2P)/MgLiAl composite during dynamic tension
YAl_(2P)/Mg-Li-Al复合材料动态拉伸断裂过程原位观察
11.
EBSD "In-Situ" Study of Microstructural Transformation of Plain Carbon Steel Q235 During Tension Deformation
Q235碳素钢拉伸塑性变形过程中组织转变的EBSD“原位”分析研究
12.
Dispersion Principle of In-Situ Bubble Stretching and Preparation of Magnesium-Nanocomposites with Flame Retardancy and Smoke Suppression;
原位气泡拉伸法分散规律及纳米镁基聚合物阻燃抑烟复合材料的研究
13.
In Situ X-Ray Diffraction Study of the Relationship between Microstructure and Mechanical Properties of Amorphous Sulfur and sPP
原位X射线检测聚合物（非晶硫、sPP）拉伸过程中的结构变化与力学性能关系
14.
Analysis on the Reason for Tensile Fracture Stratification of Q345 Plate
Q345钢板拉伸断口分层原因分析
15.
The application of traction to a fractured or dislocated limb to restore the normal position.
牵引，牵伸（术）为使骨折或脱位的肢体恢复原位而进行的牵伸动作
16.
Study on Streching Technology, Mechanism, Structure and Properties of Pan Precursor;
聚丙烯腈原丝拉伸工艺、机理及结构性能的研究
17.
The Reason Analysis for Abnormal Fracture in Cold Bending and Stretching of 510L Automobile Crossbeam Steel
510L汽车大梁钢冷弯、拉伸异常断口原因分析
18.
Analysis of Cause for Layered Fracture Occurring during Tensile Test of Q390E Steel Plate
Q390E钢板拉伸试验试样断口分层原因分析