1.
specified percentage decarburation
规定脱碳率的脱碳层厚度
2.
Permissible depth of flaw and decarburized layer
裂纹之容许深度及脱碳层
3.
Diameter Tolerance, Ovality and Average Decarburized Layer Depth
直径公差，偏圆度及脱碳层的平均深度
4.
Determination of depth of decarborization of steel
GB/T224-1987钢的脱碳层深度测定法
5.
The relationship between the thickness of decarbonic layer of metal spring and the temperature and time heated;
金属弹簧脱碳层厚度与受热温度和时间的关系
6.
RESEARCH ON CHANGE LAW OF DEPTH OF DECARBURIZATION LAYER ON SURFACE OF WIRE BAR
对线材表面脱碳层深度变化规律的研究
7.
To remove carbon dioxide or carbonic acid from.
脱去…的二氧化碳或碳酸
8.
ELO-Vac process
电炉真空脱碳脱气法
9.
Effect of Composition and Grain Size of Ti(C,N) on the Cobalt-rich Layer ofGradient Cemented Carbide
Ti(C,N)的碳氮比及粒度对脱β层梯度硬质合金的影响
10.
Engine-decarbonising chemicals
引擎脱碳用化学制剂
11.
Impact of 60Si2MnA wire rod decarburization on oil-hardened and tempered steel wire
60Si2MnA线材脱碳对油淬火—回火钢丝脱碳的影响
12.
This, in turn, react with the iron to form oxide free iron and carbon dioxide.
一氧化碳接着又与铁形成脱氧的铁和二氧化碳。
13.
Model and effect of slow-release organic carbon-source materials on carbon release and denitrification
缓释有机碳源材料释碳模型与生物脱氮效应
14.
Influence of carbon to nitrogen ratio on nitrogen and carbon removal by integrative A/O process
一体化A/O工艺碳氮比对脱氮除碳的影响
15.
Model for the distribution of carburized case depth of spur gear in warm forming after car burizing
直齿轮“渗碳-温挤”渗碳层厚度分布模型
16.
SiC-HfSi_2-TaSi_2 HIGH TEMPERATURE ANTI-ABLATION COMPOUND COATING ON CARBON/CARBON COMPOSITES
碳/碳复合材料SiC–HfSi_2–TaSi_2抗烧蚀复合涂层
17.
Iron & Low Carbon as Base Metal
低碳钢或铁基层金属
18.
fissured carbonate reservoir
裂缝性碳酸盐岩储集层