1.
Innovation and manufacture of ZY338-type screw press
ZY338型螺旋榨油机的创新与研制
2.
crackling expeller
油渣螺旋压榨机, 油渣榨干机
3.
hand-operated vertical screw press
手摇立式螺旋压榨机
4.
tighten the screw on a fruit press
旋紧水果榨汁机的螺丝
5.
horizontal continuous-acting auger press
卧式连续动作螺旋压榨机
6.
Experimental Research on Sludge Dewatering by Screw Press Dehydrator
螺旋压榨式脱水机对污泥脱水的试验研究
7.
This machine presses the oil out of peanuts (presses vegetables into juice).
这台机器榨花生油(把蔬菜榨成汁)。
8.
Internal combustion engines--Piston rings--Coil-spring-loaded oil control rings
GB/T1149.7-1994内燃机活塞环螺旋撑簧油环
9.
The CFD Analysis Modeling of Helical Air Passage of SL1126 Diesel Engine;
SL1126柴油机螺旋进气道建模及CFD分析
10.
Research Based on CAD/CFD for Helical Intake Port of Direct Injection Diesel Engine;
基于CAD/CFD的柴油机螺旋进气道研究
11.
CFD Analysis on the Diesel Engine Intake Port in the CIMS Circumstance;
CIMS环境下柴油机螺旋进气道的CFD分析
12.
Structural Optimization of Helical Intake Port and CFD Analysis
柴油机螺旋进气道结构优化与CFD分析
13.
controllable pitch propeller oil pump
可调螺距螺旋桨油泵
14.
Soaking-pressing Production Technology of Almond Oil Using Hydraulic Oil Press
液压榨油机低温浸榨杏仁油的工艺研究
15.
hand-powered oilcan (incl. those with pump or screw mechanism), of base metal
油箱,手动的（包括带有泵或螺旋机构的）,贱金属制
16.
Theoretical and Experimental Study on Lubrication Mechanism of a Spiral Oil Wedge Journal Bearing;
螺旋油楔滑动轴承润滑机理的理论与实验研究
17.
Research Base on CAD/CFD for Helical Intake Port of 135 Diesel Engine;
基于CAD/CFD的135型柴油机螺旋进气道的研究
18.
The Research of Three-dimensional Flow in Diesel Helical Intake Port;
车用柴油机螺旋进气道三维流动的研究