1.
The Study of the Post-treatment of the Polymer-coated Molybdenum Powder Parts Formed by Selective Laser Sintering (SLS);
覆膜钼粉激光烧结成型件后处理工艺研究
2.
The Studying of the Laser Sintering and Post-treatment of the Polymer-coated Molybdenum Powder;
覆膜钼粉激光烧结成型及后处理工艺技术研究
3.
Accumulation of sucrose and starch contents during the grain filling stage of foxtail millet in two cultural practices
覆草覆膜栽培谷子灌浆期籽粒蔗糖及淀粉积累
4.
Surface Modification of Phosphors by Transparent Conducting Oxide Films;
透明导电氧化物薄膜包覆荧光粉的研究
5.
Coating Process and Mechanism of PDP Phosphor with Composite Alumina and Silica Oxide
PDP荧光粉表面包覆Al_2O_3-SiO_2复合膜及机制研究(英文)
6.
POROUS CERAMIC SUPPORT OF COATED ALUMINA PREPARED BY LOW-TEMPERATURE SINTERING
包覆型Al_2O_3粉体制备低温烧成多孔陶瓷膜支撑体
7.
Properties of the selective laser sintered specimens of nylon12-coated aluminum powders
尼龙12覆膜铝粉激光烧结成形件的性能研究
8.
THE EFFECT OF MOLYBDENUM POWDER MORPHOLOGY ON FRACTURE PROPERTIES OF MOLYBDENUM WIRE
钼粉形貌对钼丝断裂性能的影响研究
9.
Study on Numerical Simulation of 3D Temperature Field during Selective Laser Sintering Polymer-coated Metal Powder;
覆膜金属粉末激光烧结成型过程三维温度场数值模拟技术研究
10.
Fabrication of Titania Coatings on ZnS-Type Phosphors Using the Titanium Diethanolamine as the Precursor in the Aqueous Solution;
硫化锌荧光粉表面包覆二氧化钛纳米薄膜的绿色过程研究
11.
Effects of Plastic Film Mulching on Development and Yield and Starch Content of Cassava
地膜覆盖对木薯生长发育和产量及淀粉含量的影响
12.
chrome-molybdenum potentiometer
铬-钼合金膜电位器
13.
To cover with or as if with a film.
在…上覆以薄膜覆以或好象覆以薄膜
14.
Study on the Preparation and Mechanism of High Performance Molybdenum Powder and Sintered Molybdenum;
高性能钼粉与烧结钼的制备及机理研究
15.
Covered with mealy dust or powder.
被粉的覆盖着粉灰或粉末的
16.
Study on the surface modification of MoS_2 powder with KH570
KH570对二硫化钼粉体表面的改性研究
17.
Sintering behavior of Mo/Cu composite powders prepared by electroless copper plating on molybdenum powders
钼粉表面化学镀铜复合粉末烧结致密化
18.
cloth covered with powdered emery.
覆有金刚砂粉末的布。