说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 熔融粘度
1.
To illustrate the effect of variable feed rate, the pressure and power draw changes with fluctuations in feed rate are calculated on the table below.
瞬间的压力变化及峰值出现是由熔融粘度瞬间变化导致的。
2.
For example, a variation of20% in the feed rate causes a9% increase or decrease in pressure, which is a variability range of18%.
温度恒定时,熔融粘度变化通常是由于投料速率变化和/或混和不均导致的。
3.
Preparation of Nylon 6 with High Viscosity by Chain-extension during Melting Extrusion
熔融挤出扩链反应制备高粘度尼龙6
4.
Experimental Study of the Effect of Coal Blending on Ash Fusibility and Slag Viscosity
配煤对煤灰熔融特性和灰渣粘度影响的实验研究
5.
The addition of a plasticizer may lower the melt viscosity, elastic modulus, and glass transition temperature (Tg) of a plastic.
同时,加入增塑剂,还可以降低塑料在熔融态时的粘度、弹性模数及玻璃转变温度(tg)。
6.
The melting sticking occurred when the melting point of materials is lower than the drying temperature.
物料熔点低于干燥温度时容易产生热熔性粘壁。
7.
Study on Improving the Fusibility of Shenhua-coal-ash;
提高神华煤灰熔融温度和熔融性的研究
8.
The Experiment and Theoretics Study of Viscosity of Cu-Sn Alloys;
Cu-Sn合金熔体粘度的实验与理论研究
9.
Study on Viscosity in Silicate Melts;
硅酸盐熔体粘度理论计算模式的研究
10.
Apparent Viscosity of TiB_2 Particle Reinforced Aluminum Matrix Composites Melt
TiB_2/Al复合材料熔体的表观粘度
11.
Effect of Fusing Agent on Ash Fusion Characteristic and Slag Viscosity of Huainan Coal;
助熔剂对淮南矿区煤灰熔融特性及粘温特性的影响
12.
An Approach to the Problems of Clay-fused Quartz Sagger
有关“粘土-熔融石英”匣钵几个问题的探讨
13.
Cooling the melt( in a quiescent state) to achieve the desired solid fraction.
冷却熔融金属(态下)得理想的固态粒度。
14.
Among the properties which do not show a leveling-off are the viscosities of solutions and melts.
溶液和熔体的粘度等性能曲线并不呈现平坦。
15.
Study on Strength Properties of Phosphate Bonded Core Used in Investment Cast and Formed by Pouring
熔模铸造用浇注成形磷酸盐粘结型芯强度研究
16.
Effect of Effective Concentration of High Melting Point Phases in RH Refining on Slag Sticking
RH精炼渣高熔点相作用浓度对粘渣的影响
17.
Study on the Viscosity Control of Foam Aluminum Melt and the Bubble's Stability
泡沫铝熔体粘度的控制与气泡稳定性研究
18.
An iron rod on which molten glass is handled when being shaped and worked.
顶底杆用于粘住已熔融的玻璃以进行定型和加工的铁棒