1.
Topology Optimization of Beam Cross Section Considering Warping Deformation;
考虑翘曲变形的梁截面拓扑优化设计
2.
Study on Warpage of Injection Products Based on CAE;
基于CAE技术的注塑制品翘曲变形研究
3.
Moldflow-based analysis on the warpage of thin walled plastic part
基于Moldflow塑料薄壳制品翘曲变形分析
4.
Most Effective Factors Affecting Warpage of Injection Molded Parts
注塑制品翘曲变形的最显著影响因素
5.
Research on Deformation Compensation and Numerical Simulation of Plastics Warpage;
注塑件翘曲变形的数值模拟及变形补偿研究
6.
Finite Element Simulation of Warp Distortion in Direct Metal Laser Multi-layers and Multi-tracks Sintering;
多层多道金属粉末激光烧结体翘曲变形模拟
7.
Auto Thin Case Injected Plastic Part Tilting Distortion & Manufacturing Process Optimization Research;
汽车薄壳注塑件翘曲变形及注塑工艺优化研究
8.
Curing Shrinkage and Warpage Deformation of Composite Thin Laminates at Room Temperature
复合材料薄层板常温固化收缩及翘曲变形
9.
Application of MoldFlow Software in Soloving Plastics Parts Twisting Deformation
MoldFlow模流分析在解决塑件翘曲变形中的应用
10.
Research on the thermal stress and warpage of WLCSP device
晶圆尺寸级封装器件的热应力及翘曲变形
11.
Analysis of the Effects of Temperature Warping Deformation on Base
路面板温度翘曲变形对基层的作用分析
12.
Effect of Packing Parameters on Warpage of Moulded Part during Injection Moulding
注塑成型保压参数对塑件翘曲变形的影响
13.
Simulation on curing warpage deformation of composite T-shaped integrated structure
复合材料T型整体化结构固化翘曲变形模拟
14.
Research of Residual Stresses and Warpage of Plastic Injection Molding Based on Surface Model
基于表面模型的塑料注射成型残余应力与翘曲变形研究
15.
Finite Element Analysis of Thin-Walled Composite Laminated Beams with Geometrically Nonlinear Behavior Including Warping Eeformation
考虑翘曲变形的复合材料叠合梁几何非线性的有限元分析
16.
Numerical Simulation on the Warpage in Co-Injection Molding Based on MoldFlow Software
基于MoldFlow的塑料共注成型制品翘曲变形的数值模拟
17.
The logs should be cut from larger pieces and have alternate strips turned end to end so that warping tendency will be resisted.
加工时，应先将大木料裁成板，然后把相邻两块纹理相反地排列胶合起来，这样可以防止翘曲变形。
18.
The product can be directly made into flat thimble without warping and deformation.
该产品直接制作扁顶针不翘曲、不变形。