1.
An etching made by this process.
细点腐蚀制板法的过程
2.
The Test of Dot Taint for 2205 Stainless Steel
2205不锈钢的点腐蚀试验的研究
3.
The corrosion mechanisms of low temperature dew point corrosion and improvements of atmospheric air pre-heater to resist low-temperature dew point corrosion were introduced.
文章对烟气低温露点腐蚀的机理以及常压炉空气预热器耐低温露点腐蚀的改进措施做了介绍.
4.
Study on acid dew point temperature change follow heat pipe tube bank combination
热管管排组合对露点腐蚀温度影响研究
5.
Sulfuric-acid Dew Point Corrosion-resistant Steel
耐硫酸露点腐蚀用钢的研究与应用综述
6.
APPLY INORGANIC HEAT PIPE TECHNOLOGY TO TREAT DEWPOINT CORROSION PROBLEM OF REFORMING HEATER
采用无机热管技术解决重整加热炉的露点腐蚀
7.
dew cycle corrosion tester
露点循环腐蚀试验机
8.
It was found that the pitting and crevice corrosion of steel wires were the main forms of corrosion.
发现70钢丝的缝隙腐蚀和点蚀是钢丝绳的主要腐蚀形式。
9.
Effect of Vibrio Natriegens on Metal Corrosion in Sea Water and Research on Anti-pitting Method
Vibrio Natriegens对海洋金属腐蚀的影响及抗点蚀方法研究
10.
There is corrode spot and pitting on the surface of all valve.
所有阀门表面上都有腐蚀斑痕和麻点。
11.
Good ability in ventilation，less leakage and anti-corrosion.
具有通风量大、泄漏量小、耐腐蚀等特点。
12.
Blood Sister: Their corruption runs deep.
血妹：他们的内心已经腐蚀到了极点。
13.
The Influence of the Corrosive Atmosphere on the Common Contact Metals;
大气对常用触点金属材料的腐蚀影响
14.
As mentioned, leaks from cylinders containing corrosives may escalate because the corrosive material may attack the leak point, making it larger.
如上所述，因为腐蚀材料会侵蚀泄漏点，使之越来越大，装有腐蚀剂的钢瓶的泄漏会逐步加剧。
15.
When the leak involves a corrosive product, however, the leak will generally worsen because the corrosive material attacks the leak point.
但是当泄漏同腐蚀性产品有关时，由于腐蚀性材料侵蚀泄漏点，泄漏一般会恶化。
16.
thermal etching
热腐蚀;热浸蚀;热力学侵蚀;热蚀;热蚀法
17.
The Study on Susceptibility of Pitting Corrssion and Stress Corrossion Cracking in Circulating Cooling Water Containing Chloride Ion;
304不锈钢在含Cl~-模拟循环冷却水中点蚀和应力腐蚀敏感性的研究
18.
This sum of money will be used to clean the corrode spots and pitting.
这笔赔偿的坛子将用于清除腐蚀斑痕和麻点。