说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 半固态坯
1.
Preparation of Al_2O_(3p)/Al-Cu Matrix Semi-solid Billet
Al_2O_(3p)/Al-Cu基半固态坯料的制备
2.
Preparation of TiC/7075Al Matrix Semi-solid Billet
TiC/7075Al基半固态坯料的制备
3.
New Technology for Preparing Semi-Solid Billets of LC9 Aluminum Alloy
LC9铝合金半固态坯料制备工艺研究
4.
Superplasticity Research on Semi-solid Blank of 7A09 Aluminium Alloy
7A09铝合金半固态坯料超塑性研究
5.
Numerical Simulation on Reheating Process of Magnesium Alloys Semi-solid Billets
镁合金半固态坯料重熔过程数值模拟
6.
Preparation of Semi-solid AlSi30 Billets by SIMA Method
基于SIMA法的AlSi30合金半固态坯料的制备
7.
Effects of Technological Parameters in Strong Cooling with Single-tube on Microstructure of A356 Alloy Semi-solid Billets
单管强冷法制坯工艺对A356合金半固态坯料组织的影响
8.
Preparation of Semi-solid Billet and Reheating of Hypoeutectic Al-Si Alloy;
亚共晶铝硅合金半固态坯料的制备及二次加热
9.
Study on Preparation of AlSi7Mg Alloy Semi-solid Billets by Melt Isothermal Treatment Process;
熔体等温处理法制备AlSi7Mg合金半固态坯料的研究
10.
Study on Semisolid Feedstock of A356 by Controlled Pouring Methods;
控制浇注方法制备A356半固态坯料的研究
11.
Experimental Study on Fabrication of Semisolid Billet of AlSi30 Alloy Based on New SIMA Method
基于新SIMA法的AlSi30合金半固态坯料制备试验研究
12.
Reheated microstructures of semi-solid ingots of TiC_p/7075Al composites
TiC_p/7075Al基复合材料半固态坯料二次加热组织
13.
Preparation of Mg-Al Series Magnesium Alloy Semi-solid Billets and its Thixo-extrusion Forming
Mg-Al系镁合金半固态坯料制备及触变挤压研究
14.
Study on Compound Fabrication of Semi-solid Billet of Near-eutectic Al-Si AlloyBased on SIMA Method;
基于SIMA法的近共晶点铝硅合金半固态坯料复合制备研究
15.
The FEM Research and Technical Parameters Optimizing of the Process of AlSi9Mg Alloy Semi-solid Billet Production;
AlSi_9Mg合金半固态坯料制备有限元分析及工艺参数优化
16.
Research on the Making of Semi-Solid Billet of AZ91D Magnesium Alloy by Direct Extrusion-ECAP;
正挤压—等径道弯曲制备AZ91D镁合金半固态坯料研究
17.
Research on Semi-Solid Billet of 6061 Aluminium Alloy by Sima and Its Thixo-Forming;
变诱导法铝合金(6061)半固态坯料制备及触变成型研究
18.
Research on Effect of AZ91D-Y Semi-Solid Billets Preparing by Different Methods on Thixoforging
AZ91D-Y半固态坯不同制备方法及对触变模锻影响研究