1.
Research on the Dummy Bar of Austempered Ductile Iron;
等温淬火球铁(ADI)引锭杆的研制
2.
Comparison and Analysis of the Automatic Control of a Dummy Bar Follow -up System of CCM
连铸机引锭杆跟踪系统自动控制比较分析
3.
Analysis for starting bar out of gear problem in home - made ROKOP CCM
对国产罗克普型连铸机引锭杆顶齿问题的剖析
4.
Technical Questions in Designing Dummy Bar of Slab Continuous Casting
板坯连铸引锭杆设计中的若干技术问题
5.
Trouble - shooting of Beam Blank Caster Dummy Bar Storage Device;
异型坯连铸机引锭杆存放装置故障分析及处理方法
6.
technology of using laser in the heat-treatment of ingot red
锭杆激光热处理技术
7.
cable-driven ingot buggy
钢丝绳牵引的送锭车
8.
The PLC Control System of Weaving Ingot-shaped Tablet Rod Exceeds Grinding Machine;
纺织锭杆超精机PLC控制系统的设计研究
9.
The Anlayzing of Interference between Spindle Blade and Whirl to Their Jonit Precision
D32锭子杆盘配合过盈量对其精度的影响探析
10.
draw-bar carrier bolt
牵引杆托(板)螺栓
11.
Effect of Ultrasonic Probe Area of End Face on Solidification Structure of Al-1%Si Ingots
超声波传振杆的端面面积对Al-1%Si铸锭凝固组织的影响
12.
rigid body guidance mechanism
刚体导引的连杆机构
13.
drawbar pull - weight ratio
牵引杆拉力-重量比
14.
trailer with adjustable drawbar height
牵引杆高度可调式挂车
15.
mould setting-and-stripping bay
钢锭模准备和脱锭跨
16.
A small, circular medicinal lozenge; a pastille.
片剂，锭剂圆型的小药锭，锭剂
17.
Ingot defects may be broadly classified into internal flaws and surface flaws. Internal flaws are caused by shrinkage.
钢锭缺陷广义上可分为内部缺陷和表面缺陷。内部缺陷是因收缩引起的。
18.
Defects due to the use of worn moulds, including fins, surface crazing, and scaps or bulges.
因为使用磨损钢锭模而引起的缺陷，包括飞边、表面网纹、疤痕或突起等。