1.
Crack Analysis in Heat Treatment of Cr12MoV Convex Mold;
Cr12MoV凸模热处理裂纹分析
2.
Transverse crack analysis of SWRH 82B wire rod drawing
SWRH82B盘条拉拔横裂纹分析
3.
The Analysis of Welding Cracks of Low Temperature Separation-condensator of Natural Gas;
天然气低温分离聚结器焊接裂纹分析
4.
The analysis of cracking in steel bridges can usually be accomplished by using linearelastic fracture mechanics.
通常可用线弹性断裂力学进行钢桥裂纹分析。
5.
Crack Analysis and Disposal for the Weld of High-Pressure Stainless Steel Pipe in Hydrocracking
加氢裂化高压不锈钢管道焊缝裂纹分析及处理
6.
ANALYSIS AND WELDING REPAIR OF CRACKS IN A NEW TYPE PUMP BONNET
新180泵头盖裂纹分析及焊接修复
7.
Hardening Crack Analysis and Prevention Measurement for 45 SteelWobbling Arm Axis
45钢摆臂轴淬火裂纹分析及防止措施
8.
Fracture Analysis of Piezoelectric Materials with Centric Cracks
中心裂纹压电材料板的断裂问题分析
9.
Resarch on crack preventing on-line in 40GrNiMo specimen with edge crack and its microstructure analysis
40GrNiMo试件单边裂纹在线止裂及组织分析
10.
Finite Element Analysis of the Crack Tip Field and Structural Evolution Behavior of the Crack Tip;
裂纹尖端场的有限元分析与裂尖结构演化行为
11.
Elastic-Plasticity Analysis of Ⅰ/Ⅱ Mixed Mode Crack and Probability Caculation of Fracture Failure
Ⅰ-Ⅱ型裂纹的弹塑性分析及断裂失效概率计算
12.
Multi-scale Analysis of Mechanical Properties on Fracture Process Zone
多尺度下裂纹断裂过程区力学特性分析
13.
Cracking analysis on corner-inclusive shearing fractures for rubber vibration-reduction spacers
含角裂纹剪切型橡胶减振垫的断裂分析
14.
Analysis of the Main Stress Invariants Criterions for Mixed Mode Crack Initiation Angles
混合型裂纹应力不变量断裂准则的分析
15.
Fracture Strength of Wires with Cracks in Suspension Bridge
带裂纹的悬索桥主缆钢丝的断裂强度分析
16.
Elastic-plastic fracture analysis of multiple-cracks with two-parameters under biaxial loads
双向荷载下多裂纹弹塑性双参数断裂分析
17.
The analysis of crack development process of fracture mechanics steel concrete structure
断裂力学钢筋混凝土结构中裂纹发展过程分析
18.
BEM Analysis of Transient Response in Surface Crack Problems
表面裂纹问题瞬态响应的边界元分析