1.
To determine mandril diameter for 48"LSAW pipe
48英寸大口径直缝焊管成形芯轴直径确定
2.
Mathematic calculation approach of minimum bending radius of mandrel based on Matlab
基于Matlab的芯轴最小弯曲半径计算
3.
SMALLER DIAMETER OF PIVOT BEARING
轮毂轴承的较小直径端
4.
The axis of a circle is its diameter.
圆的轴线是其直径.
5.
Check internal diameter of bearings.
检查轴承的内直径。
6.
MAIN BEARING JOURNAL DIAMETER (CRANKSHAFT REMOVED)
主轴承颈部直径（曲轴已卸去）
7.
Measuring diameter of fore and aft stern tube bearing and bushes.
艉轴管前、轴承与衬套直径测量。
8.
Journal diameter is less than 64365 mm (4975 inches).
轴颈直径7于64365 公厘(4975英寸)
9.
Measurement of odd boss raceway diameter of linear motion ball bearing
直线运动球轴承奇数凸台沟道直径的测量
10.
Construction Method of Coring for Pore Forming Based on Water Drilling of Super-diameter Rock Pile
超大直径岩石桩水钻取芯成孔的施工技术
11.
(biology) capable of division into symmetrical halves by any longitudinal plane passing through the axis.
（生物学）沿任何一条通过轴，直径可以均分为二。
12.
We are to measure(must measure) the diameter of this small axle by means of a micrometer.
我们必须用千分尺来测量这根小轴的直径。
13.
Installation Technologies of Preburied Prestressed Anchor Bolts of Wide Diameter Pin Roll Hinge Supports
预埋预应力锚栓的大直径销轴铰支座安装技术
14.
The Study on Indirect Squeeze Casting of the Larger-diameter Retainer;
大直径轴承保持架间接挤压铸造的研究
15.
Theoretical Inference and Experiential Formulas of Mandrel Diameter Applied to Wind Garter Spring;
绕制卡簧用心轴直径的理论推导与经验公式
16.
Effects of rolling-ball diameter of ceramic bearing on rotor critical speeds
陶瓷轴承滚珠直径对转子临界转速的影响
17.
Uncertainty Evaluation for the Measurement Result of Rolling Bearings Needle Roller Diameter
滚动轴承滚针直径测量结果的不确定度评定
18.
Rules and Process of the GCr15 Bearing Steel′s Through Water Cooling
大直径GCr15轴承钢棒材穿水冷却规律及工艺研究