1.
Experimental Study of the Bonding Characterization of Dental Porcelain to Ni-Cr-Ti Alloys in the Shear Test;
镍铬钛烤瓷合金剪切结合强度的试验研究
2.
Shear Strength of Flip Chip Packaging Bonded with Anisotropic Conductive Film
倒装芯片各向异性导电胶互连的剪切结合强度
3.
testing methods for shear strength of adhesive bonds by tensile loading
用拉伸负荷测定粘合剂剪切强度
4.
The Effect of Treating Time on the Shear Bond Strength of the Seventh Generation of Adhesive
粘结处理时间对第七代粘结剂剪切强度的影响
5.
Evaluation of Interlaminar Shear Strength of Laminates;
层合板复合材料层间剪切强度评价方法的研究
6.
testing methods for shear strength of plastics by punch tool
塑料剪切强度试验方法
7.
uniform strain shearing strengh tester
等应变剪切强度测试仪
8.
An Analysis on Hull Girder Shear Strength in Accordance with CSR
满足油船共同结构规范的船体梁剪切强度分析
9.
Effect of sandblasting on shear bond strength between rebonded metal brackets and enamel
喷砂处理对脱落托槽与牙面粘结的抗剪切强度
10.
The comparative study of the shear bond strength of two adhesives
不同黏结系统牙本质剪切强度的实验研究
11.
Study on Shear Strengths of Rock Structure Planes in Different Shearing Direction by Simulation Experiment
岩体结构面不同剪切方向的抗剪强度模拟试验研究
12.
Experimental Investigation on Shear Strength of Composite Single-lap Joints
复合材料单搭接头的剪切强度对比实验研究
13.
Indirect methods to measure the interface bond strength include the interlaminar shear strength test.
测量界面粘结强度的间接方法包括层间剪切强度试验。
14.
Shear Stiffness Prediction of Stitched Composite Sandwich Structure with Foam Core
缝合复合材料泡沫夹芯结构剪切刚度预报
15.
"Maximum shear Strength 63Kg/mm2(90,000psi) maximum (based on 75% yield) "
剪切强度最大63Kg/mm2(90000psi)(为屈服强度的75%)
16.
Testing Method for Tensile and Shear Strength of High Strength Photosensitive Glue
高强度光敏胶拉伸剪切强度测试方法
17.
Comparative study of shear bonding strength on different bonding treatments of different fiber posts in root canal
不同纤维桩与根管不同粘结处理修复后剪切粘结强度对比研究
18.
Interlaminar Shear Strength of Z Direction Reinforced Plain-woven C/SiC Composite
Z向增强平纹编织C/SiC复合材料层间剪切强度(英文)