1.
Analysis of the Impact Toughness Test and Fracture of Rail Thermit Welding Joints at Low Temperature
低温下铁路钢轨铝热焊缝接头冲击韧性试验与断口分析
2.
Relation of welding speed and heat input at aluminum alloy friction stir welding
铝合金搅拌摩擦焊时焊接速度与热输入的关系
3.
Softening of Heat Affected Zone (HAZ) of 2090Al -Li Alloy during Welding
2090铝锂合金焊接热影响区软化机理
4.
Heat Treatment Strengthening of Al─Li Alloy 2091 Welded Joint
2091铝锂合金焊接接头的热处理强化
5.
Appraisal of Faw-Ford Brazed Aluminum Radiator Project;
一汽-福特铝钎焊散热器项目后评价
6.
Research on Change Rule of Cladding Rate of Hot-rolled Aluminum Matrix Brazing Sheet
热轧铝基钎焊板包覆率变化规律研究
7.
The welding methods, heat-affected zone, and design method of weld strength are introduced.
文中介绍铝合金的焊接方法、接热影响区以及焊接强度的设计方法。
8.
Controlling Welding Stress, Deformation and Hot Cracking of Aluminum Alloy Thin Plates by Welding with Trailing Rotating Extrusion
随焊旋转挤压控制铝合金薄板焊接应力变形及防热裂研究
9.
Effects of heat treatment after welding on friction stir welding joints of high-strength aluminum alloy
焊后热处理对高强铝合金搅拌摩擦焊接头的影响
10.
Numerical Simulation of Temperature Field in Laser Deep Penetration Welding for Aluminum Alloys;
铝合金激光深熔焊热过程数值模拟研究
11.
Simulation of Grain Growth in the HAZ of Industrial Pure Aluminum;
工业纯铝焊接热影响区晶粒生长的模拟研究
12.
Study on Hot Deformation Structure and Property for Mid-strength Weldable Al-Li Alloy;
中强可焊铝锂合金热变形组织和性能的研究
13.
The Investigation of Fatigue Behavior of Friction Stir Welded Aluminum Alloy s Heat Affected Zone;
铝合金搅拌摩擦焊热影响区疲劳行为研究
14.
Research on Welding Hot Cracking of High Speed Train Alluminum Alloy
高速列车铝合金材料焊接热裂纹倾向研究
15.
Finite Element Numerical Simulation of Temperature Field in Deep Penetration Laser Welding for Aluminum Alloys
铝合金激光深熔焊接热过程有限元数值模拟
16.
Effect of restraint condition on hot cracking during welding of 2A12T4 aluminum alloy
2A12T4铝合金焊接时拘束条件对热裂纹的影响
17.
Research on pulsed MIG welding for heavy thickness aluminum components without preheating
大厚度铝构件无预热状态下的脉冲MIG焊
18.
Summary on reason of aluminum alloy panel radiator by vacuum brazing leak out
铝合金板式换热器真空钎焊泄漏原因分析