1.
Pocket tool path optimization in high speed milling;
型腔高速铣削加工刀具轨迹优化研究
2.
Research on High Speed Milling Forces and Cutter Path Optimizing;
高速铣削切削力变化及刀具轨迹优化研究
3.
Study on Tool Path Generation and Optimization of Plunge Milling for Cavity with Material of Titanium Alloy
钛合金型腔插铣刀具轨迹优化方法研究
4.
An Programming Algorithm Based on Network Optimization of Tool Path in Complex Pocket
基于网络优化的复杂型腔刀具轨迹规划算法
5.
An Optimized Algorithm Based on the Shortest Path of Tool Path in Complex Pocket
最短路优化的复杂型腔刀具轨迹规划算法
6.
Abstract: When a NC milling toolpath is generated, in order to reduce machi ning errors and manufacuring cost, the optimization of NC toolpath have to b e paid attention to.
文摘:在生成NC铣加工刀具的运动轨迹时，应注意优化加工路径，以减少加工误差、少加工成本。
7.
When a NC milling toolpath is generated, in order to reduce machi ning errors and manufacuring cost, the optimization of NC toolpath have to b e paid attention to.
在生成NC铣加工刀具的运动轨迹时，应注意优化加工路径，以减少加工误差、少加工成本。
8.
The key technical research in interference-free tool path of torus cutter
圆角刀无干涉刀具轨迹关键技术研究
9.
Tool Path Calculation of NC Machining Based on Actual Profile of Cutter
基于刀具实际廓形的数控加工刀具轨迹计算
10.
Offset Algorithm Based Tool-path Planning for NC Machining;
基于等距法的数控加工刀具轨迹规划
11.
The Tool Path Generation Software System for 2Dimensions Numerical Control;
二维数控刀具轨迹自动生成软件系统
12.
Tool Path Planning for High Speed Milling of Free-form Surface with Toroidal Cutter
环形刀具高速铣削自由曲面轨迹规划
13.
Analytical Study about Milling-NC Tool-path Optimization and Macro-structure Plan of CATPP System;
数铣刀位轨迹优化及其系统总体结构设计分析与研究
14.
System for Tool Path Generation of 2D Contour Milling of Die;
模具二维轮廓铣削加工刀具轨迹生成系统
15.
Research on Tool-path in the Process of Sculptured Surface NC-machining;
复杂型面NC加工过程中刀具轨迹的研究
16.
Tool-path Programming Based on Reverse Engineering in NC Machining;
基于反求的数控加工刀具轨迹的路径规划
17.
Research on Technical Parameters and Cuttingtool Path of NC Machining Process;
数控切削加工工艺参数及刀具运动轨迹的研究
18.
Research on Techniques of Information Extraction and Toolpath Planning Based on STEP-NC;
基于STEP-NC的信息提取及刀具轨迹规划技术研究