1.
Shell core and cold box coremaking are the main technique at present.
目前制芯工艺主要采用壳芯和冷芯盒制芯技术。
2.
Application of Cold Box Core Process for Modern Lean Cast
应用冷芯制芯中心,迈向现代精益铸造
3.
Defects Analysis and Control Technique of Cold-box Core
冷芯盒制芯工艺缺陷原因分析及其控制技术
4.
Design of AC-DC PWM Switching Power Supply Control IC;
AC-DC脉宽调制开关电源控制芯片设计
5.
Sand Care Making Technology and Mould Design for Cylinder Blolck and Camshaft of Model 491 Engine
491型发动机缸体、凸轮轴砂芯制芯工艺及模具设计
6.
Study on the Tri-ethylamine Cold Box in Core-Making for the Casting of Cylinder Body and Head;
用于缸体、缸盖生产的三乙胺法冷芯盒制芯工艺研究与应用
7.
chaplet, of iron or steel (excl. moulder's nails), for foundery moulding cores
型芯撑,钢或铁制（不包括型芯撑钉）用于翻砂制模型芯）
8.
cord, foundry, used in the reparation of sand moulds
翻砂型芯,用于制备砂型
9.
core box, used in the preparation of sand moulds
型芯盒,用于制备砂型
10.
bushing machine
卷制机 -电容式套管芯子
11.
The Development of Metal Cored Self-shielded Flux-cored Wire for Submerged Overlaying
金属粉芯自保护堆焊用药芯焊丝的研制
12.
Coupling Approach and Mechanism of Single-Core and Twin-Core Fiber
单芯光纤与双芯光纤的耦合方法与耦合机制
13.
The IDE disks are controlled by the IDE controller chip and the SCSI disks by the SCSI disk controller chips and so on.
IDE磁盘被IDE控制器芯片控制而SCSI磁盘由SCSI磁盘控制器芯片控制。
14.
RESEARCH AND CALCULATION OF THE FIXED SHORT CORE DRAWING FORCE
固定短芯头拔制时拔制力的计算研究
15.
In later generations, the chip ultimately could command implanted devices ?
在继而开发的新一代芯片中，这个芯片最终可以控制植入的装置。
16.
A soft, heavy cotton thread similar to that used to make wicks for candles.
灯芯绒一种柔软、厚重的棉线，类似于用来制造烛芯的棉线
17.
A computer chip made from organic molecules rather than silicon or germanium.
生物芯片用有机分子而非硅或锗制造的计算机芯片
18.
The machine is mainly used for stranding steel core AL stranding wire, nude copper, nude AL stranding wire or insulated wire core stranding.
本机主要供绞制钢芯铝绞线,裸铜、裸铝绞线或作绝缘线芯绞合之用。