1.
Study on Process and Properties of Ni-W Alloy Coatings Produced by Pulse Plating;
脉冲电镀Ni-W合金镀层及其性能研究
2.
Study on the Ni/nano-SiC Composite Coating Made by Fast Frequency Pulse Electroplating;
高频脉冲电镀镍基纳米SiC复合镀层的研究
3.
Corrosion Behavior of High-frequency Pulse-deposited Nano-crystalline Ni Coating;
高频脉冲电镀纳米晶镍镀层腐蚀行为研究
4.
Preparation of Ni-Mo Alloy Coating by Pulse Plating and Its HER Activity
脉冲电镀制备Ni-Mo合金镀层及其析氢性能
5.
The Study of Pulse Electroplating of Au-Sn Bumps
脉冲电镀法制备Au-Sn凸点的研究
6.
Pure nickel deposits were obtained from the traditional Watt nickel plating bath by pulse electroplating .
采用传统的瓦特镀液通过脉冲电镀制得纯镍镀层。
7.
The Highly Effective Double-Sided Pulse Plating Current Supply s Research and Realizes;
高效双向脉冲电镀电流源的研究与实现
8.
Effects of process parameters on the textures of tungsten coatings electrodeposited from Na_2WO_4-WO_3-ZnO molten salts
双向脉冲电镀工艺参数对Na_2WO_4-ZnO-WO_3熔盐镀钨层织构的影响
9.
Study on Mechanical Performance of High Frequency Pulse Electroforming Ni-Co Alloy;
高频脉冲电镀镍钴合金机械性能的研究
10.
The Design of Pulse Plating System Based on Distributed Control Network;
基于集散控制网络的脉冲电镀系统设计
11.
Silver recovery and cyanide removal from silver-plating wastewater using pulse-electrolysis
脉冲电源电解处理含氰含银电镀废水
12.
The Pulse Electronics Brush Plates the Repair Rolling Mill Tooth Wheel Axle to Brush Plates the Craft Practice
脉冲电刷镀修复轧机齿轮轴刷镀工艺实践
13.
Study of CrAlN Film Deposited by Pulsed Bias Arc Ion Plating;
脉冲偏压电弧离子镀CrAlN薄膜性能研究
14.
Fundamentals of Pulsed Bias Arc Ion Plating;
脉冲偏压电弧离子镀的工艺基础研究
15.
Factors Affecting the Deposition Rate of Poised Electro-Brush Plated Nickel Coating
脉冲电刷镀镍中沉积速度的影响因素
16.
Dielectric Films of TiO_2 and AlN by Pulsed Bias Arc Ion Plating;
脉冲偏压电弧离子镀沉积TiO_2与AlN介电薄膜
17.
Experimental study on treating electroplating wastewater containing Cr~(6+) with pulse-electro-coagulation
脉冲电絮凝处理电镀含铬废水的实验研究
18.
Superhard Multilayer Films Prepared by Pulsed Bias Arc Ion Plating;
脉冲偏压电弧离子镀沉积超硬多层薄膜