1.
Preparation and characterization of barium strontium titanate nanoparticles by low temperature calcination method
钛酸锶钡纳米粒子的低温煅烧法制备与表征
2.
Extraction of Nano-α-Al_2O_3 and SiO_2 from Fly Ash by Low Temperature Calcination
用低温煅烧法从粉煤灰中提取纳米Al_2O_3和SiO_2
3.
The Research of Extracting Alumina from Fly Ash by Lime Autoclave-Low Temperature Calcining and Coal Powder-Lime Burning Process
石灰蒸压—低温煅烧法与煤粉—石灰直接燃烧法提取粉煤灰中氧化铝的实验研究
4.
Research of Extracting Alumina from Fly Ash through low Temperature Stream-pressure and Calcination Process
粉煤灰低温蒸压煅烧提取氧化铝的试验研究
5.
The liquid synthesis of nanocrystals titania at low temperature, due to avoiding the sintering process, brings superior physical and chemical properties.
低温液相合成晶态纳米二氧化钛由于避免了高温煅烧过程，可望赋予其更优越的特性。
6.
is high-fired, vitrified and nonporous.
高温煅烧，成玻璃状并且无缝。
7.
Determination and control of insulation points in retort calciner
罐式煅烧炉烘炉保温点的确定与控制
8.
Influence of Combustion Temperature on Strength Activity of Pulverized Strontium Slag
煅烧温度对磨细锶渣强度活性的影响
9.
Study on optimum burning temperature of white cement by soda residue
碱渣烧制白色水泥适宜煅烧温度的研究
10.
RESEARCH ON HIGH TEMPERATURE SINTERING BEHAVIOR OF CaO SORBENT USED IN MULTI-CYCLIC CO_2 CAPTURING
CaO碳化-煅烧循环捕获CO_2高温烧结特性研究
11.
The Research On Calcination Temperature and Soaking Time of the Silicon Chrome Green Pigment
硅铬绿色料煅烧温度及保温时间的研究
12.
Study on Preparation of Ultrafine α-Al_2O_3 by Catalytic Sintering;
降温催化煅烧制备超细α-Al_2O_3粉体的研究
13.
Research on the Principle and Temperature-controled System of Calcining Step-kiln for Experiments;
实验用煅烧步进窑原理及温控系统研究
14.
Effects of Burnt Gypsum on the Hydration of C_3S and C_2S;
高温煅烧石膏对C_3S和C_2S水化过程的影响
15.
Study on the Temperature Control Algorithm of Gypsum Calcinatory System
脱硫石膏干燥煅烧系统温度控制的算法研究
16.
Study of the Calcining Temperature Effect on the Properties of Needle Coke from Baosteel
煅烧温度对宝钢针状焦性能影响的研究
17.
POLYCRYSTALLINE STRUCTURE OF WASTE SLAG INALUMINUM FACTORY AT DIFFERENT CALCINING TEMPERATURES
煅烧温度对铝型材厂污泥晶相结构影响的研究
18.
Effects of catalysts and calcination temperatures on synthesis of SiC fibers
催化剂及煅烧温度对合成SiC纤维的影响