1.
Investigation on Properties of Deposited Metals by Shielded Metal Arc Welding Process D172;
D172焊条电弧堆焊熔敷金属性能研究
2.
Ti content on diffusible hydrogen of deposited metal of flux cored wire
钛对药芯焊丝熔敷金属扩散氢的影响
3.
Investigation on Solidification Cracking Susceptibility of 690 Nickel-based Welding Strip Surfacing Metal;
690镍基合金焊带熔敷金属结晶裂纹敏感性研究
4.
Cerium Oxide Influence upon Low Alloy Steel Electrode Deposited Metal
氧化铈对低合金钢焊条熔敷金属的影响
5.
THE FORECAST AND CONTROL OF THE AMOUNT OF DIFFUSION HYDROGEN IN THE DEPOSITED METAL OF BASIC ELECTRODES
碱性焊条熔敷金属中扩散氢的予报及控制
6.
Study on the Submerged Arc Welding Consumables for 2.25Cr-1Mo-0.25V Steel and Its Microstructure and Mechanical Properties of the Deposited Metal;
2.25Cr-1Mo-0.25V钢埋弧焊焊材及熔敷金属组织性能研究
7.
Study on Ductility Dip Cracking Sensitivity for Incone1690 Electrode Filler Metal;
Incone1690焊条熔敷金属高温低塑性裂纹敏感性研究
8.
Primary Exploration of Fractal Dimension of Fracture Surface of Deposited Metal and Its Mechanical Properties;
熔敷金属断裂表面分维与其力学性能关系初探
9.
Study on the High Temperature Corrosion Property of the Deposited Metal of Stainless Steel Coated Electrode;
不锈钢焊条熔敷金属高温腐蚀性能研究
10.
Study on Microstructure and Property of Deposited Metal Prepared by Electrode CHR132 and CHR172;
焊条CHR132和CHR172堆焊熔敷金属组织及性能研究
11.
High-temperature Oxidation Behavior of Deposited Metal for New Ni-base Flux-cored Wire
新型镍基药芯焊丝熔敷金属的高温氧化行为
12.
Effect of Ti content on microstructure toughness of deposited metal with flux cored wire
钛对气保护药芯焊丝熔敷金属组织韧性的影响
13.
The Effect of Niobium Content on Microstructure and Property of Fe-Cr-C Hardfacing Alloy
铌含量对Fe-Cr-C熔敷金属组织与性能的影响
14.
Influence of Lanthanum and Yttrium on Low Carbon Steel Electrode Deposited Metal
镧、钇元素对低碳钢焊条熔敷金属影响的研究
15.
Influence of Heat Treatment Temperature on Microstructure and Micro-hardness of Deposited Metal
热处理温度对熔敷金属组织及其硬度的影响
16.
Difference of impact absorbed energy between butt weld metal and deposited metal
对接焊缝金属和熔敷金属冲击吸收功差异的探讨
17.
Non-Twin Strengthening and Toughening Mechanism for Cold-Weld Deposited Metall of High Carbon Alloy Steel;
冷焊态高碳合金钢型熔敷金属无孪晶强化及增韧
18.
Effects of Several Components on the Toughness of Deposited Metal and Usability of Self-shielded Flux Cored Wire;
几种组分对自保护药芯焊丝工艺性能和熔敷金属韧性的影响