1.
Like the cylinder block, the head is made from either cast iron or aluminum alloy.
像气缸体一样，气缸盖是由铸铁或者铝合金制成。
2.
The cylinder head is attached to the block with high-tensile steel studs.
气缸盖与气缸体用高强度的钢螺栓缚连结。
3.
The Numerical Simulation of Flow and Temperature Field in Cylinder Head of Diesel Engine with Small Cylinder Bore;
小缸径柴油机气缸盖流场、温度场的数值模拟
4.
"In the other kind of valve mechanism for an engine, the valves are located in the cylinder Block instead of the head."
另一种气门机构的气门是装在气缸体上,而不是装在气缸盖上。
5.
having both inlet and exhaust valves located in the cylinder head.
在气缸盖上有出口和入口。
6.
"The cylinder head is usually cast in one piece from iron, from iron alloyed with other metals, or from aluminum alloy."
气缸盖通常由铁、铁合金或铝合金铸成。
7.
Research on 4G1 Cylinder Cover Workability by Low Pressure Casting;
低压铸造4G1气缸盖加工性能的研究
8.
M3500 Vermicular Iron Cylinder Foundry Technique Majorization Based on AnyCasting
基于AnyCasting的M3500蠕铁气缸盖铸造工艺优化
9.
Application HCPCF Spectrophotometry to Determinat Zinc in the Cylinder Head of 376Q
利用HCPCF光度法测定376Q气缸盖中的锌
10.
Reason anylisis and countermeasures of crack in cylinder head for 240D diesel engine
240D型气缸盖裂纹原因分析及改进方案
11.
Method of finite element analysis for cylinder head of engine
6114柴油机气缸盖的有限元分析
12.
Application of MC Machining Technology in the Cylinder-head Techniques
数控加工技术在气缸盖工艺中的应用
13.
The cylinder head fastens to the top of the block, just as a roof fits over a house.
气缸盖固定在气缸体的顶上，正像屋顶套在一所房子上面一样。
14.
Cylinder Head-Cylinder Mat-Cylinder Block Contact Thermal & Mechanical Analysis and Discussion about the Method;
Z6110型柴油机气缸盖、气缸垫接触强度分析及其算法的探讨
15.
Finite Element Analysis for Composite Structure of Cylinder Head and Cushion in Automobile Engine
汽车发动机气缸盖与气缸垫组合结构的有限元分析
16.
"The Block and head can not be machined flat and smooth enough to provide an adequate seal. Thus, gaskets are used."
机器加工并不能使气缸体和气缸盖平整光滑到严丝密缝,这样就要使用气缸垫。
17.
fits into the cylinder head of an internal-combustion engine and ignites the gas by means of an electric spark.
插入内燃机气缸盖通过电火花点燃气体。
18.
Process Technology Research on Valve Seat Ring and Valve Stem Guide Hole of Cylinder Head;
气缸盖气门座圈和导管孔的加工工艺研究