说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 加压烧结
1.
The Research of Cooling Water Flow for Pressure Sintering of Iron-based Powder Metallurgy Brake Materials
铁基粉末冶金刹车材料加压烧结冷却水流量研究
2.
The effect of the additives and its amount on the densification of BN-ZrO?2 composite powder body during hot pressing sintering were investigated.
研究了烧结助剂和添加量及烧结温度对氮化硼、化锆复合粉体在热压烧结过程致密化的影响。
3.
Experimental Study on Pore Structure and Combustion Characteristic of Coal-Chars at Elevated Pressure;
半焦孔隙结构和加压燃烧特性的试验研究
4.
Effect of Al Addition on Synthesis of Ti_3SiC_2 Powder by Pressureless Reactive Sintering
添加Al对无压反应烧结制备Ti_3SiC_2粉末的影响
5.
ULTRA-HIGH PRESSURE SINTER NANO-SiC CERAMIC
无烧结助剂SiC陶瓷的高压烧结研究
6.
Ceramic elements are made by pressing and sintering finely powdered material s.
陶瓷元件是将仔细研磨的材料经过加压和烧结制成。
7.
Strengthen the Control of the Whole Process of Sintering And Keep the Stability of the Quality of Sinter
加强烧结过程控制与稳定烧结矿质量
8.
The Influences of Different Additives on Pressureless Sintering of Si_3N_4 Ceramics;
不同烧结助剂对氮化硅常压烧结的影响
9.
The Pressureless Sintering Behavior and Master Sintering Curve at Constant Heating Rate for Titania;
氧化钛恒速无压烧结行为及主烧结曲线研究
10.
Microstructure and Mechanical Properties of Hot-pressed TiB_2-VB Composites
热压烧结TiB_2-VB复合陶瓷的结构与性能
11.
INDUSTRIAL AGGLOMERATING TEST TO ADD TITANIUM CONCENTRATE FROM NEW ZEALAND
承钢烧结厂配加新西兰钛精矿烧结工业试验
12.
Production test of sinter ore with Australian ore to improve the sintering machine capacity
烧结配加澳矿生产试验提高烧结机利用系数
13.
Study on Extracting V_2O_5 from Vanadium-containing Stone Coal by Process of Ore Roasting-alkaline Pressure Leaching
石煤提钒原矿焙烧-加压碱浸工艺研究
14.
Sometimes either the compression or the sintering may be omitted. During the heating it is generally necessary to protect the material from oxidation by atmospheric air, by the use of non-oxidizing gas.
偶尔亦可不进行压制或无须烧结。在加热时一般必须使用非氧化气体.以防止粉末被空气氧化。
15.
Sintering as a whole offers resistance against friction, pressure and corrosion, with long service life.
整体烧结,耐磨耐压耐腐,使用寿命长。
16.
casting machine for pressure casting (excl. for sintering)
压力铸造式浇铸机(用于烧结的除外)
17.
Study on Properties of PZT-PbO·WO_3 Piezoelectric Ceramics Sintered at Low Temperature;
低温烧结PZT-PbO·WO_3压电陶瓷性能研究
18.
The Investigation on the Sintering Mechanism for α-Al_2O_3 under the Pressureless Sintering Condition at Constant Heating Rates;
α-Al_2O_3的恒速无压烧结机理研究