1.
The Research on Process and Microstructure of Thin Parts in Laser Cladding Forming;
激光熔覆成形薄壁试件的工艺和显微组织研究
2.
The Optimization of Processing Parameters and Experimental Investigation on Metal Components Fabricated by Laser Cladding;
激光熔覆成形金属零件的参数优化及实验研究
3.
Basic Experiment and Simulation on Laser Cladding Forming of Metal Powder;
金属粉末激光熔覆成形的基础试验与模拟
4.
Structural design of substrate preheating for laser cladding
激光熔覆成形预热基板设计及试验研究
5.
Application of ANSYS Software in Temperature Field Numerical Simulation of Laser Cladding Forming
ANSYS在激光熔覆成形温度场数值模拟中的应用
6.
Effects of powder delivering parameters on diode laser clad line shape
送粉参数对半导体激光熔覆成形结构形貌的影响
7.
Study on the Technology of Inside-Laser Coaxial Powder Feeding Cladding and Rapid Prototyping Process of Laser;
基于光内送粉的激光熔覆快速成形技术研究
8.
Study on Inside-laser Powder Feeding of Laser Cladding Rapid Prototyping
激光熔覆快速成形光内送粉方式的研究
9.
Study on Ni-based Alloy Powders for the Laser Cladding and the Rapid Forming;
激光熔覆及快速成形专用镍基粉末的研制
10.
Study of Part Rapid Prototype and Powder System of Laser Cladding Rapid Manufacturing;
激光熔覆实体快速成形及送粉系统研究
11.
Research of High Power Laser Cladding Rapid Prototyping Technology;
大功率激光熔覆快速成形工艺实验研究
12.
Study on Fe-based Alloy Powders for the Laser Cladding and the Rapid Forming;
激光熔覆及快速成形专用铁基粉末的研制
13.
Grain Formation Model and Experimental Research on Laser Cladding Metal Layer;
激光熔覆金属层晶粒形成模型及其试验研究
14.
Numerical Simulation of Temperature Field and Process Optimization in Multi-layer Laser Cladding Forming
激光多层熔覆成形温度场数值模拟和工艺优化
15.
Study on in Situ Synthesized Ceramic Phase Reinforced Fe-based Coating by Laser Cladding
激光熔覆原位合成陶瓷相增强Fe基熔覆层研究
16.
Primary Study of Lean Parts on Inside-Laser Coaxial Powder Feeding Device and Process of Laser Cladding Rapid Prototyping;
激光熔覆快速成形光内同轴送粉斜壁堆积的初步研究
17.
Research on the Laser Cladding Inclined Wall Accumulation Based on the Internal Laser Coaxial-powder Feeding Technology
基于光内同轴送粉技术的激光熔覆斜壁堆积成形研究
18.
The Influence of Inside-Laser Coaxial Powder Feeding Technology Parameter on Forming under the Action of Annular Facula;
环形激光作用下同轴送粉熔覆工艺参数对成形的影响