1.
Study on Corner Sink and Vertical Cracks of CC Steel Billet
连铸坯角部凹陷及纵向裂纹的研究
2.
Research on Magnetic Testing Methods and Their Application to Longitudinal Cracks of Steel Bars;
钢棒纵向裂纹磁性检测方法及应用研究
3.
The results showed that the major cause of longitudinal surface cracking of20 steel tube blanks was higher nonmetallic inclusion content in the steel than standard value.
结果表明:非金属夹杂物超标是导致管坯表面产生纵向裂纹的主要原因。
4.
Longitudinal-cracking Failure Analysis of Box
φ139.7mm钻杆内螺纹接头纵向开裂失效分析
5.
Analysis on the tendency of welding hot cracks of aluminum alloy increased by longitudinal pre-tension
纵向预拉伸增大铝合金焊接热裂纹倾向的分析
6.
The cracks are primarily parallel to the longitudinal direction of the girder and to the nominal bending stresses.
裂纹基本上平行于主梁纵向，既平行于名义弯曲应力。
7.
This indicated that the fracture had initiated at the unfused butt weld in the longitudinal stiffener.
研究表明裂纹是从纵向加劲助未熔透的对接焊缝中起始的。
8.
broken or burst apart longitudinally.
纵向破碎或者突然纵向破裂。
9.
Listed in Column 2 are descriptions of the cracking.
第二纵列是关于裂纹的描述。
10.
Study On Longitudinal Surface Cracks On CSP Hot-Rolled Plate
酒钢CSP热轧板卷表面纵裂纹研究
11.
CAUSE ANALYSIS FOR SURFACE LONGITUDINAL CRACKS ON Q235B SLAB
Q235B钢板坯表面纵裂纹的原因分析
12.
Improvement Practice of Reducing Surface Longitudinal Crack of Wide and Thick Slab
减少宽厚板坯表面纵裂纹的改进实践
13.
Analysis and study of surface longitudinal cracks for SS400 steel sheet
SS400钢板表面纵裂纹分析及实验研究
14.
Growing Crack Tip-fields on Anisotropic Bimaterial Interface
各向异性双材料界面裂纹扩展裂尖场
15.
Formation and prevention of grade 20 steel CC bloom surface longitudinal cracking
20钢φ180连铸坯表面纵裂纹的形成与防止
16.
Technics Study of Reducing Longitudinal Surface Crack of Beam Blank
减少连铸异型坯表面纵裂纹的工艺研究
17.
Cause Analysis and Prevention Measure of Terminal Crack of Submerge-arc Welding Longtitudinal Weld
埋弧焊纵焊缝终端裂纹原因分析及预防措施
18.
Generation Reason Analysis of Cold Crack in Welding Joint of Automobile Variable Speed Control Handle
汽车变速操纵杆焊接接头冷裂纹产生原因分析