说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 组合加热
1.
Experimental Investigation and Simulation on the Combined Heating Measurement of Conductivity Apparatus with Guarded Plane;
防护板法导热仪组合加热方式的数值模拟和试验研究
2.
100kHz IGBT Induction Heating Power Supply Research;
100kHz IGBT组合感应加热电源研究
3.
A Study on Microstructural Characteristics during Hot Processing of GH864 Superalloy
GH864合金热加工过程中组织特征研究
4.
Casting and remelted microstructures of ZL201 alloy obtained by liquidus semi-continuous casting
ZL201合金液相线铸造与二次加热的合金组织
5.
Numerical Simulation of Temperature Field in Unite Heating Rotary Furnace
蓄热烧嘴与常规烧嘴组合供热式环形加热炉全炉温度场数值模拟
6.
Assemble the upper heater-A/C housing half to the lower halDuring assembly, be certain of the following:
将上一半加热器-空调外壳与下一半组合。组合时,务必满足下列要求:
7.
Effect of Cold Deformation and Heat Treatment on Microstructure and Mechanical Properties of the TM50 Titanium Alloy;
冷加工及热处理对TM50钛合金组织与性能的影响
8.
Study on Heating and Solidification Microstructure of Upset AZ91D Mg Alloy in the Semi-solid State;
压缩形变AZ91D镁合金半固态加热及凝固组织研究
9.
Microstructure Forcast and Hot Deformation Numerical Simulation of AZ61B Mg Alloys;
AZ61B镁合金热加工成形的数值模拟及组织预报
10.
Reheated microstructures of semi-solid ingots of TiC_p/7075Al composites
TiC_p/7075Al基复合材料半固态坯料二次加热组织
11.
Effect of Heat Treatment on Microstructure and Mechanical Properties of Ti53311s Titanium Alloy
热加工对Ti53311s钛合金显微组织和力学性能的影响
12.
Study on Microstructures of Laser Melted Surface and Their Transformation During Treating and Superplastic Forming/Diffusion Bond of a γ-TiAl Alloy;
γ-TiAl合金激光快凝组织与加热转变组织及其超塑扩散连接研究
13.
Delicious food. Coupled with warm service. It is the perfect combination!
美味的食品..再加上热情的服务..简直就是完美的组合!
14.
Preassembly of economizer coils shall be expedited; 100 nos. joints of eco. &SH shall be welded.
加快省煤器蛇形管排预组合,本周内完成省煤器和过热器接口100个.
15.
Effect of Thermo-mechanical Processing on Microstructure and Mechanical Properties of in Situ Ti Matrix Composites;
热加工对原位自生钛基复合材料组织和力学性能影响的研究
16.
Research on the Microstructure Evolution and Simulation of TC21 Titanium Alloy in the Hot Working Process;
TC21钛合金热加工过程的微观组织演变及模拟研究
17.
Study on Subsidiary Stir and Solidification Structure of Semi-solid Magnesium Alloy Prepared by Solid State Reheated;
固态二次加热制备半固态镁合金浆料辅助搅拌及其凝固组织研究
18.
The Influence of Hot Procedure and Parameters to Ti_3Al/TC4 Dual Alloy Compressor s Structure and Properties;
热加工参数对Ti_3Al/TC4双合金构件组织、性能的影响研究