1.
The application of high temperature burning is one of the key point of this attempt.
其中运用与高温烧制亦是本次尝试创作的重点。
2.
Study on NO_x emission for high temperature air combustion
高温燃烧技术中NO_x排放控制研究
3.
Made of shaping Polytetrafluoethylene Resin by moulding in ordinary lemperature then through high heat sintering.
将聚四氟乙烯烧树脂在常温下用模压法成型后再经高温烧结制成。
4.
Analysis and Control of High Temperature Sintering in Titanium Sponge Production by Magnesium Reduction Method
镁法海绵钛生产中高温烧结的分析与控制
5.
Preparation and sintering microstructure of nanometer Fe coated Si_3N_4 composite powders
纳米Fe包覆Si_3N_4的制备及其高温烧结微观组织
6.
Applying high velocity burners and pulse combustion control system, it is possible to get accurate temperature control and even distribution of temperature of furnaces.
选用高速烧嘴及脉冲燃烧技术可以使热处理炉获得较精确的温度控制及较高的炉温均匀性。
7.
Made of shaping Polytetrafluorethylene Resin by moulding in ordinary temperature then through high heat sintering.
将聚四氟乙烯树脂在常温下用模压法成型后再经高温烧结制成。
8.
Made of shaping Polytetrafluoethylene Resin into blank by moulding in ordinary temperature, through high heat sintering, then ratary cut.
用聚四氟乙烯烧树脂在常温下用模压法制成坯料，经高温烧结后旋切而成。
9.
Preparation of LiMn_2O_4 by Low Temperature Molten-Combustion Method
低温熔盐燃烧法制备LiMn_2O_4
10.
The Selection and Control of Heating System in the Process of High-temperature Prebaking of Aluminum Reduction Cell;
铝电解槽高温烟气焙烧过程中加热制度的选择与控制
11.
a high price, temperature, fever, speed, wind, living standard
高价、 高温、 高烧、 高速、 大风、 高的生活水平
12.
Indirect Selective Laser Sintering(SLS) Technology
间接法选择性激光烧结技术制备高温特殊复合材料
13.
Studies on the Preparation of High-temperature Resistant Catalytic Materials for Methane Combustion;
高温催化材料制备方法及其在甲烷催化燃烧中应用的研究
14.
Preparation Research of Al-Ti-C Master Alloy by Self-Propagating High-Temperature Synthesis;
自蔓延高温燃烧合成Al-Ti-C中间合金的制备研究
15.
Made of pressing Polytetrafluoethylene Resin into various simple shapes of seal in ordinary temperature then through high heat sintering and special treatments.
用聚四氟乙烯树脂在常温下压制各种简单形状的密封件，再经高温烧结后经特殊方法处理制成。
16.
The influences of particle size, calcining temperature, and time on the preparation of lime with high activity from small particles of limestone were studied.
研究了石灰石粒度、烧温度和时间对小颗粒石灰石煅烧制备高活性度石灰的影响。
17.
Preparation and Characterization of Substitued Hexaaluminate Catalysts for Methane Combustion;
掺杂六铝酸盐高温燃烧催化剂的制备及其在甲烷催化燃烧中性能的研究
18.
Study on the Sintering of cBN-AlN Composites at the HPHT;
cBN-AlN的高温高压烧结研究