1.
Numerical Simulation on Energy-saving and Oxidation-loss of Billet in Heating Process;
钢坯热过程节能与氧化烧损数值模拟研究
2.
Numerical Simulation Study on Loss of Iron Scale in Soaking Process of CSP Line
CSP均热过程钢坯氧化烧损的数值模拟研究
3.
In addition, some advice was given on soluting the axygenated burning loss of liquid aluminium surface and the erosion of crucible.
此外，对解决铝液表面氧化烧损和坩埚内壁腐蚀问题提出了参考意见。
4.
The wear mechanism of stainless steel against copper based sintered alloy is mainly attributed to adhesion,abrasion and oxidation.
不锈钢/铜基烧结合金材料的磨损机制主要是粘着磨损及氧化磨损。
5.
Study of Micro-scale Abrasive Wear Mechanism of Y-TZP Ceramic
热压烧结氧化锆陶瓷的微磨料磨损机制研究
6.
heat loss due to unburned gas
化学不完全燃烧热损失
7.
catalytic combustion type oxygen analyzer
催化燃烧式氧分析仪
8.
CO firing waste heat boiler
一氧化碳燃烧废热锅炉
9.
caustic, caustic soda
烧碱,苛性钠,氢氧化钠
10.
EFFECT OF TITANIUM OXIDE ON SINTERING BEHAVIOR OF CHROMIUM OXIDE MATERIALS
氧化钛对氧化铬材料烧结特性的影响
11.
The fuel and oxidizer are kerosene and liquid oxygen, respectively.
燃烧剂和氧化剂分别为煤油和液氧。
12.
CO combustion model for circulating fluidized bed combustor
一氧化碳在循环流化床燃烧室中的燃烧模型
13.
Probing into process complementation of oxidizing and acidifying roasting of zinc concentrates
锌精矿氧化焙烧与酸化焙烧工艺互补探讨
14.
Magnesium Hydroxide of High Grade and Extra Fine Obtained by Hydration of Light-burned Magnesia Calcined from Magnesite;
菱镁矿煅烧氧化镁水化制备高纯超细氢氧化镁
15.
Influences of Sintered Technologies and Additives on Properties of Aluminum Oxide Ceramic;
烧结工艺及烧结助剂对氧化铝陶瓷性能的影响
16.
The Pressureless Sintering Behavior and Master Sintering Curve at Constant Heating Rate for Titania;
氧化钛恒速无压烧结行为及主烧结曲线研究
17.
Commercial test of direct recovery of alumina and soda in Sintering process
烧结法硅渣直接烧结回收氧化铝和碱工业试验
18.
Study of Oxidation and DNA Damage of Sulfure Dioxide on Mice;
二氧化硫对小鼠的氧化损伤及DNA损伤作用