1.
Research on Theory of Variational Curve of Belt Conveyor with Horizontal Curves;
平面转弯带式输送机变坡转弯理论的研究
2.
Design of Planar Turning Mechanism for Overhead Manned Equipment for Mine
浅谈煤矿架空乘人装置中平面转弯机构的设计
3.
Dynamic Analysis for Belt Conveyor with Horizontal Curves and Research on Optimum Design of Pulley Structure;
平面转弯带式输送机动力学分析及滚筒结构优化设计研究
4.
Research on Traffic Organization Optimization Methods of Turning-vehicle Flows at At-grade Intersections;
平面交叉口转弯车流交通组织优化方法研究
5.
The car corners well, ie remains steady on curves.
这车转弯转得很平稳.
6.
Experimental Investigation of the Aerodynamic Performance of Bowed Blades in High-turning Linear Turbine Cascades
弯叶片对大转角平面涡轮叶栅气动性能影响的实验研究
7.
Turn right and right again.
右转弯，再右转弯。
8.
The same considerations apply to the correct banking angle of a plane when it makes a turn in level flight.
当水平飞行的飞机转弯时，同样应有一定的倾斜，倾斜角的大小可按与上面相同的考虑来决定。
9.
A plane section of a surface of revolution containing the axis of revolution.
切平面通过旋转轴回转面的部分平面
10.
To turn or direct inward.
使向内弯转向或指向里面
11.
testing method for flexural fatigue of rigid plastics by plane bending
硬质塑料板的平面弯曲疲劳测定法
12.
The Ultimate Load-Carrying Capacity in-Plane of Tapered Member;
楔形压弯构件平面内稳定极限承载力
13.
Study on spring-back compensation for non-plane tube bending process
非平面弯管成形过程的回弹补偿研究
14.
Investigation on in-plane stability behavior of cold-formed steel C-section flexural members
冷弯型钢C形截面受弯构件平面内稳定性能研究
15.
Out-of-plane Stability Analysis of Tapered I-sectioned Beam-columns with Slender Web;
楔形宽薄腹工形截面压弯构件平面外稳定分析
16.
Effects of Bending in Flatwise Bending Mode on Mechanical Properties of Pure Titanium Miniplates;
平面弯曲方式下弯制对纯钛小型接骨板机械性能的影响
17.
Experimental Verification on the Calculation of the Castellated Beam-Columns′ Stability and Carrying Capacity in Plane
蜂窝式压弯构件弯矩作用平面内稳定承载力计算的试验验证
18.
Take the first right after the level crossing and that's Lime Street.
过了平交道拐第一个右转弯，那就是Lime街。