1.
Thermomechanical Experimental Research of SMPs and Microbuckling Analysis of Their Composites
形状记忆聚合物热力学实验研究及其复合材料屈曲变形机理分析
2.
Thermal Flection Distortion and Stress Analysis in Alumina Film/Al-alloy Substrate by Finite Element Method
开孔氧化铝薄膜/铝合金基体热屈曲变形和应力分析
3.
Finite Element Analysis of Thermal flection Distortion in Hard Alumina Film/Al-allay Substrate System by ANSYS
基于ANSYS的硬质氧化铝薄膜/铝合金基体系统热屈曲变形有限元分析
4.
Analysis for Distortional Buckling of Cold-formed Thin-walled C-section Steel in Bending;
冷弯薄壁C形槽钢受弯畸变屈曲分析
5.
Study of Critical Theory about Buckling Forming of Middle Thick-walled Tube Bearing Axial Load;
中厚壁圆管轴压屈曲极限变形理论研究
6.
Experimental Study on Distortional Buckling of Cold-formed C-type Channel Section;
冷弯薄壁C形槽钢畸变屈曲的试验研究
7.
Out-Plane Buckling of Simply Supported Tapered Beam;
简支楔形变截面工字钢梁的弹性弯扭屈曲
8.
Effect of Pre-buckling Coupling Deformation on Stability of a Functionally Graded Plate
前屈曲耦合变形对功能梯度板稳定性的影响
9.
Buckling of compressed bar subjected to combined effect of axial loads considering shear deformation
考虑剪切变形时轴向载荷联合作用下压杆屈曲
10.
DEFORMATION AND BUCKLING ANALYSIS OF RING BY BARYCENTRIC INTERPOLATION COLLOCATION METHOD
圆环变形及屈曲的重心插值配点法分析
11.
The yield point represents the dividing line or transition from the elastic to the plastic region of the curve.
屈服点是弹性变形区域到塑性变形区域之间曲线的过渡点。
12.
Local Buckling and Post-Buckling Strength of Tapered Member;
楔形压弯构件的局部屈曲及屈曲后强度
13.
Experimental and Theoretical Study on Distortional Buckling of Cold-Formed Thin Wall Steel Lipped Channel Columns under Compression;
卷边槽形冷弯薄壁型钢轴压柱畸变屈曲的试验和理论研究
14.
Experimental and Theoretical Study on Distortional Buckling of High Strength Cold-formed Steel Lipped Channel Columns under Axial Compression;
高强冷弯薄壁型钢卷边槽形截面轴压柱畸变屈曲试验与理论研究
15.
Local and Distortional Buckling Analysis of Cold-Formed Lipped-Channel with V-Stiffened Web under Axial Compression Force;
腹板V形加劲的冷弯卷边槽钢轴压下局部和畸变屈曲分析
16.
Thermal Deformation and Buckling Analysis on Large Space Structures Including Thin-walled Open Section Beam;
含开口薄壁杆件的大型空间结构热变形与热屈曲分析
17.
Numerical and Analytical Approximate Solutions to Large Post-buckling Deformations of Some One-dimentional Elastic Structures
若干一维弹性结构后屈曲大变形的数值与解析逼近解
18.
Calculation of the allowable variation of transverse profile for cold rolled strips based on the buckling criterion
基于屈曲失稳判据的冷连轧断面形状可变域求解