1.
It has enormous technical strength and abundant producing experience.
拥有先进的反应烧结炉，高温气压烧结炉等静压压机等专业生产设备。
2.
Test method for firmness of getter by pressure or sinter
GB/T9506.10-1988吸气剂压制或烧结牢固度测试方法
3.
constant pressure combustion gas turbine
定压燃烧式燃气轮机
4.
two-stage pressure-gas burner
两级压力气体燃烧器
5.
ULTRA-HIGH PRESSURE SINTER NANO-SiC CERAMIC
无烧结助剂SiC陶瓷的高压烧结研究
6.
athodyd combustion chamber
冲压式空气喷气发动机燃烧室
7.
The Effect of Oxygen Drop on Combustion Process Gas-Gas Injector
氧压降对气-气喷注器燃烧过程的影响
8.
Sometimes either the compression or the sintering may be omitted. During the heating it is generally necessary to protect the material from oxidation by atmospheric air, by the use of non-oxidizing gas.
偶尔亦可不进行压制或无须烧结。在加热时一般必须使用非氧化气体．以防止粉末被空气氧化。
9.
[Result] There are 81 batch samples which are disqualified. The main reasons are unstable flame height, gas leaking and the unstable gas pressure.
[结果]有81批样品质量不合格,主要原因是燃烧高度不稳、漏气及气压不稳定。
10.
The Influences of Different Additives on Pressureless Sintering of Si_3N_4 Ceramics;
不同烧结助剂对氮化硅常压烧结的影响
11.
The Pressureless Sintering Behavior and Master Sintering Curve at Constant Heating Rate for Titania;
氧化钛恒速无压烧结行为及主烧结曲线研究
12.
Research on the Gas Permeability in the Acid Pellet Sintering Process;
酒钢球团烧结法新工艺烧结过程透气性研究
13.
Effects of Sintering Atmosphere on Sintered Properties of Stainless Steel Powders;
烧结气氛对不锈钢粉末烧结性能的影响
14.
Microstructure and Mechanical Properties of Hot-pressed TiB_2-VB Composites
热压烧结TiB_2-VB复合陶瓷的结构与性能
15.
The gas pressures of combustion are used to rotate the shaft.
燃烧产生的气压被用于推动轴的旋转。
16.
supersonic combustion ramjet
超音速燃烧冲压喷气发动机
17.
subsonic combustion ramjet
亚音速燃烧冲压喷气发动机
18.
Reaserch on QHCCI (Quasi-Homogeneous Charge Compression Ignition) Combustion System;
QHCCI（准均质充气压缩点燃）燃烧系统研究