1.
Steel cord conveyor belts
GB/T9770-1988钢丝绳芯输送带
2.
Steel cord conveyor belts-Cable-to-coating bond test
GB/T5755-1986钢丝绳芯输送带钢丝绳粘合强度的测定
3.
testing method of steel cord conveyor belts
钢丝绳芯输送带试验方法
4.
testing method for adhesion of rubber to steel cord
橡胶和钢丝绳芯粘合试验方法
5.
Improvement of Steel Wire Rope Core Belt Lacing Lap Joint Craftwork
钢丝绳芯输送带接头搭接工艺的改进
6.
Steel cord conveyor belts-Longitudinal traction test-Measurement of tensile strength
GB/T5754-1986钢丝绳芯输送带纵向拉伸强度的测定
7.
Steel cord conveyor belts--Cover thickness measurement
GB/T5753-1994钢丝绳芯输送带覆盖层厚度的测定
8.
Research of general use and rip resistance Steel Cord Conveyor Belt was introduced in this paper.
介绍了普通用途防撕裂钢丝绳芯输送带的研制。
9.
Talking about the optimum technology of vulcanizating steel wire-cored goliath belt
浅谈钢丝绳芯强力胶带硫化工艺的优化
10.
Real-time Scanning and Monitoring System for Steel Wire Cord Reinforced Conveying Belt in Service
在线钢丝绳芯输送带实时扫描系统研究
11.
Application of Fill Joint Technique of Sticky Tape With Five-Retardant and Steel Wire Rope
钢丝绳芯阻燃胶带填充式接头技术的应用
12.
Development of Bonding Compound for Flame-retardant Steel Cord Conveyor Belt Used in Coal Mine
煤矿用阻燃钢丝绳芯输送带粘合胶的研制
13.
Steel cord conveyor belts--Adhesion strength test of the cover to the core layer
GB/T17044-1997钢丝绳芯输送带覆盖层与带芯层粘合强度试验方法
14.
Rermark: Above said structure wire rope can be added by 7×7 metal core.
注：以上各结构钢丝绳可加7×7金属芯钢丝绳。
15.
Effective measure solving the problem on decrease of rope is to use the steel wire rope with metal core.
解决钢丝绳直径减小的有效措施是使用钢芯钢丝绳。
16.
Abstract: Using high pressure greasing technique, the special protection grease for steel cable is poured into the flax wick of steel cable at the operation.
文摘:采用高压注脂技术，向运行中的钢丝绳麻芯内注入专用的钢丝绳防护脂。
17.
Steel wire ropes
GB/T8918-1996钢丝绳
18.
Wire rope grips
GB/T5976-1986钢丝绳夹