1.
Research on the Fatigue Crack Initiation and Propagation of 16Mn Steel Welded Structure;
16Mn钢焊接件疲劳裂纹萌生与扩展的研究
2.
Study on crack initiation and propagation behavior of P91 steel under impact loading
冲击载荷下P91钢的裂纹萌生与扩展行为研究
3.
Mechanism on crack initiation and propagation of rail under rolling contact fatigue
滚动接触疲劳作用下的铁轨裂纹萌生与扩展机理
4.
Crack defect promotes crack initiation and growth.
裂纹缺陷促进了裂纹的萌生和扩展.
5.
A STUDY ON FATIGUE CRACK INITIATION AND SMALL CRACK GROWTH UNDER THE CYC LIC COMPRESSIVE LOAD CONDITION
压缩循环加载下缺口裂纹的萌生与小裂纹扩展规律研究
6.
Subsurface Crack Initiation and Propagation Mechanism in GCr15 Steel;
GCr15钢内部裂纹萌生和扩展机理的研究
7.
THE INITUTION AND PROPAGATION OF THE VIBRATION FATIGUE CRACK IN SINTERED STEEL UNDER REPEATED IMPACT LOAD
多次冲击载荷下粉末冶金热锻钢的振动疲劳裂纹萌生、扩展与断裂
8.
EFFECT OF SURFACE HARDENING ON FATIGUE CRACK INITIATION AND PROPAGATION IN NODULER CAST IRON
表面强化对球铁疲劳裂纹萌生、扩展的影响
9.
Crack Initiation Toughness and Crack Propagation Toughness of PA6/POE-g-MAH Blends in Notched Impact Tests
PA6/POE-g-MAH共混物缺口冲击的裂纹萌生韧性及裂纹扩展韧性
10.
The Initiation and Growth Simulation of Single Crystal Metal Micro-crack Based on Molecular Dynamics;
基于分子动力学的单晶金属微裂纹萌生和扩展模拟
11.
Study on Initiation and Propagation of Short Crack for Low Cycle Fatigue at High Temperature and Complex Stress States;
复杂应力状态下高温低周疲劳短裂纹萌生及扩展规律研究
12.
Simulation of Structure Fatigue Crack Initiation and Growth;
结构疲劳裂纹产生与扩展的计算模拟
13.
Mechanism and Numerical Simulation of Rock s Crack Propagation Under Detonation Gas;
爆生气体作用下岩石裂纹扩展机理与数值模拟
14.
The results show that the thermal fatigue cracks after forming propagate preferentially in the hard phase, and the propagation of crack is stoped and dulled when it meet steel basic phase.
结果表明:萌生后的热疲劳裂纹优先在硬质相中扩展,遇到钢基体相后受阻、化。
15.
Fatigue Reliability Analysis and Crack Initiation Micromechanism for 42CrMo Steel;
42CrMo钢疲劳可靠性分析与裂纹萌生微观机理研究
16.
The Microstructure and Fatigue Initiation of an AA2524-T34 Aluminum Alloy
AA2524-T34铝合金的微观结构与疲劳裂纹萌生机制
17.
Theoretical and Applied Research on Crack Growth and Damage Evolution
裂纹扩展与损伤演化理论与应用研究
18.
THE FEATURE AND MECHANISM OF FATIGUE CRACK PROPAGATION IN TOOL AND DIE STEELS
工模具钢中疲劳裂纹扩展特征与机制