1.
Ⅰ-Ⅱ Mixed-mode crack stress intensity factor of the finite element calculation and analysis
Ⅰ-Ⅱ复合型裂纹的应力强度因子有限元计算分析
2.
Research on the crack growth angles of Ⅰ-Ⅱ-Ⅲ mixed mode crack with photoelastic experiment
Ⅰ-Ⅱ-Ⅲ复合型裂纹开裂角的光弹性试验研究
3.
Experimental Research on Ⅰ-Ⅱ Mixed-Mode Fracture of 45 Steel;
45钢材料Ⅰ-Ⅱ复合型断裂的实验研究
4.
Fatigue crack growth under I-III mixed-mode loading
基于Ⅰ-Ⅲ复合型疲劳裂纹扩展的研究
5.
Experimental Investigation on Initial Cracking Criterion for Ⅰ-Ⅱ Mixed in Concrete
混凝土Ⅰ-Ⅱ复合型断裂起裂准则的试验研究
6.
It is shown that the singularity of the strain field at the crack tip is smoothed in non-local theory.
根据基于不同形式权函数的非局部理论，分析了Ⅰ-Ⅱ型复合裂纹尖端的应变场。
7.
The Experimental Study on Ⅰ-Ⅱ Mixed Mode Crack in Concrete by Means of Photoelastic Coatings;
光弹贴片法实验研究混凝土Ⅰ-Ⅱ复合型断裂
8.
AN EXPERIMENTAL STUDY OF MIXED-MODE Ⅰ-Ⅱ DYNAMIC FRACTURE OF MARBLE
大理岩Ⅰ–Ⅱ复合型动态断裂的实验研究
9.
Researches on Shear Stress Criterion of Ⅰ-Ⅱ Fracture Expansion
Ⅰ-Ⅱ型裂纹发展的剪应力准则研究
10.
Elastic-Plasticity Analysis of Ⅰ/Ⅱ Mixed Mode Crack and Probability Caculation of Fracture Failure
Ⅰ-Ⅱ型裂纹的弹塑性分析及断裂失效概率计算
11.
Numerical Simulation and Experimental Verification of Brittle Fracture for Mixed Ⅰ-Ⅱ Type of V-notch;
Ⅰ-Ⅱ复合型V型切口脆性开裂的数值模拟与实验验证
12.
Propagation criterion for mixed mode Ⅰ-Ⅱ crack propagation and numerical simulation of the whole propagation process
混凝土Ⅰ-Ⅱ复合型裂缝扩展准则及扩展全过程的数值模拟
13.
Mode transformation and fractography analysis of Ⅰ+Ⅲ mixed modefatigue crack propagation in 45~# steel
45~#钢中Ⅰ+Ⅲ复合型疲劳裂纹的转型扩展及断口分析
14.
The Analysis about the Stress Field Near the Crack Tip in Composite Materials
关于复合材料单层板Ⅰ型裂纹尖端应力场的探讨
15.
Experimental Investigation on Initial Cracking Criterion and Numerical Simulation of Crack Propagation for Ⅰ-Ⅱ Mixed Mode in Concrete;
混凝土Ⅰ-Ⅱ复合型裂缝起裂准则的试验研究与裂缝扩展过程的数值模拟
16.
Exact Solution of Stress and Displacement at Crack Tip for Mode Ⅰ、Ⅱ of Infinite plate
无限大平板Ⅰ、Ⅱ型裂纹尖端应力场及位移场的精确解
17.
Study on the Determination of Mode Ⅰ and Mode Ⅱ Fracture Parameters for Concrete;
混凝土Ⅰ型、Ⅱ型断裂参数确定的研究
18.
Fracture criterion for mixed mode crack of composites based on the crack tip plastic zone
基于裂尖塑性区的复合材料复合型裂纹断裂准则