1.
Application of full AC drive system in large ladle crane
大型铸造起重机的全交流驱动系统的解决方案
2.
Research on the Optimal Design of New Type Casting Crane
新型双梁铸造起重机主减速器的优化设计研究
3.
Experiment and Production of Heavy Thick-walled Winding Barrel Casting for Crane with Spheroidal Graphite Cast Iron
大型厚壁球墨铸铁起重机卷筒铸件的试验与生产
4.
Research on Using Life of the Crane s Girder;
铸造起重机主梁结构的疲劳寿命研究
5.
Large-scale Shipbuilding Gantry Crane Lightweight Design Study
大型造船门式起重机轻量化设计研究
6.
Research and Development of CAD System for Hoisting Mechanism Design of Ladle Crane;
铸造起重机起升机构CAD系统研究与开发
7.
Application of emergency brake to the main hoisting mechanism of ladle crane
紧急制动器在铸造起重机主起升机构上的应用
8.
Fracture Failure Analysis of Heavy Metallurgic Casting Lifting Reducer Gear Shaft
大型冶金铸造吊主起升减速机齿轮轴断裂失效分析
9.
SELECTION OF DRIVING TYPE FOR MAIN HOISTER OF CASTED BRIDGE CRANE
铸造桥式起重机主起升传动形式的选择
10.
Founding of Heavy Steel Castings-The Blooming Mill Housing Used for Ma Steel 2250mm hot mill
马钢热轧2250mm初轧机架大型铸钢件的铸造
11.
Axis Breaking Detection and Protection for Planet-Gear Reducer Casting Crane
铸造起重机中行星减速机的断轴检测与保护
12.
Others: Numerical control pouring machine, Gravity die casting machine.
其它设备：数控浇注机，金属型重力铸造型机等。
13.
Analysis of the brake distance in the condition of ladle crane's hoisting mechanism failure
铸造起重机升降故障状态制动行程分析
14.
Some Ideas on Speeding up the Step of Building Large Gantry Cranes
对加快建造大型门式起重机步伐的看法
15.
Sand casting - hand molded-machine molded (and shell)
砂型铸造-手工造型-机器造型(和壳型)
16.
Static finite element analysis on cast case of large-scale centrifugal compressor
大型离心式压缩机铸造机壳的静态有限元分析
17.
The Investigation of Large Counter-Gravity Casting Equipment and Control Technology;
大型反重力铸造设备及其控制技术的研究
18.
It is demanding to fabricate crane bridge as large welded structure, so the upgrade to change its span is very challenging.
起重机桥架作为大型焊接结构件，制造要求高，其改制具有典型意义。