1.
Error Analysis Caused of CNC Lathe Tool Nose Radius
数控车刀刀尖圆弧半径引起的误差分析
2.
Application of Compensation to Corner Radius in Turning of Inside and Outside Diameter
刀尖圆弧半径补偿在内外径车削加工中的应用
3.
The effects of tool nose curvature radus on the accuracy in numerical control lathe;
数控车中刀尖圆弧半径对车削精度的影响
4.
Application of Tool Corner Radius Compensation in NC Turning
刀尖圆弧半径补偿在数控车削中的应用
5.
Analysis of tool nose radius compensation in numerical control turning processing
数控车削加工中刀尖圆弧半径补偿分析
6.
Tool Nose Round (Corner) Radius Compensation and Tool Wear Compensation Based on FANUC 0iT NC System
基于FANUC 0iT系统刀尖圆弧半径补偿与刀具磨耗补偿
7.
The Analysis and Application of the Tool Radius Compensation in CNC Turning
数控车削加工中刀尖圆弧半径补偿的分析与应用
8.
The cutting edge radius of the tools is minimized less than0.05μ m and the radius waviness of the tools is improved no more than0.2μ m.
刃磨出的金刚石刀具刃口半径值可以达到0.05μ以下，刀尖圆弧圈度提高到0.2μ以内。
9.
diameter of tip circular-arc center circle
齿尖圆弧中心圆直径
10.
diameter of tip circular-arc juncture circle
齿尖圆弧衔接点圆直径
11.
working flank radius
齿廓工作段圆弧半径
12.
Using Arc Radius Compensation for NC Machine Cutter to Repair Errors in Processing;
谈利用数控车刀具圆弧半径补偿弥补加工中的误差问题
13.
The Influence of Cutting Corner Radius on the Cutting Process of Numerical Analysis
数控车削刀具圆弧半径对切削过程影响的数值分析
14.
Study on Cutting Force for Milling Hardened Steel Arc Path with Micro-end Mill
小直径铣刀铣削淬硬钢圆弧切削力研究
15.
Indexable hard metal (carbide) inserts--Corner radii
GB/T2077-1987硬质合金可转位刀片圆角半径
16.
A radian is the angle subtended by an arc of a circle whose length is just equal to the radius.
一弧度就是长度刚好等于半径的一段圆弧所对的圆心角。
17.
Cutting Tool Shape Radius Recompense Inaccuracy Analysis by Grinding Crucial Point CNC Turning Cutting Tools
数控车削刀具的刃磨引起的刀尖半径补偿的误差分析
18.
one-fourth concave arc milling cutter
四分之一凹圆弧铣刀