1.
Investigation on Superadiabatic Combustion of Lean Premixed Gases in Porous Media;
稀薄预混气体在多孔介质中超绝热燃烧的研究
2.
Analysis of super-adiabatic combustion in porous media by excess enthalpy function
基于过剩焓函数多孔介质中超绝热燃烧的分析
3.
Combustion Mechanism and Flame Characteristics of the Superadiabatic Combustion of Premixed Gases in Porous Media;
多孔介质中预混气体超绝热燃烧机理及其火焰特性的研究
4.
Experimental and Numerical Study of Premixed Superadiabatic Combustion in Porous Media with Reciprocating Flow;
多孔介质内往复流动下超绝热燃烧的实验和数值模拟研究
5.
Experimental Study and Numerical Simulation on Super-adiabatic Combustion and Hydrogen Production Based on Pyrolysis of H_2S in Porous Media;
多孔介质内超绝热燃烧及硫化氢高温裂解制氢的试验研究和数值模拟
6.
Study on Hydrogen Production from Partly Oxidation & Pyrolysis of Hydrogen Sulfide under Super-adiabatic Combustion Temperature by Porous Media Burner;
多孔介质燃烧器内硫化氢超绝热部分氧化分解制氢的研究
7.
Elemental Study on Superadiabatic Engine Based on the Porous-Medium Combustion Technique;
基于多孔介质燃烧技术的超绝热发动机的基础研究
8.
Characteristics Study on Super-Low Value Fuel Catalytic Combustion Gas Turbine System;
超低热值燃料催化燃烧燃气轮机系统特性研究
9.
Research on Characteristic of Heat Transfer and Ablation of Insulation in the Solid Rocket Ramjet Chamber
冲压发动机补燃室内绝热层传热烧蚀特性研究
10.
Heat Transfer and Ablation of Insulation in Second Combustion Chamber with Different Configuration in SRR
不同构型固冲发动机补燃室绝热层传热烧蚀
11.
Heat transfer analysis for actively cooled supersonic combustor
带主动冷却的超声速燃烧室传热分析
12.
On Temperature Windage and Combustion Adjusting of JG-180/3.82-Q Boiler
JG-180/3.82-Q锅炉过热器超温及燃烧调整
13.
Excess enthalpy combustion characteristics in reciprocal porous media combustion system with heat recirculation
往复热循环多孔介质“超焓燃烧”特性
14.
Optimized design on a new type thermal structure of scramjet combustor
超燃冲压发动机燃烧室新型热结构的优化设计
15.
INFLUENCES OF WALL THERMAL CHARACTERISTICS ON THERMAL ENVIRONMENT IN SUPERSONIC COMBUSTORS
壁面热特性对超声速燃烧室热环境的影响
16.
A failure in a device attributable to burning, excessive heat, or friction.
烧毁，烧坏由于燃烧、超高热或摩擦引起的设备故障
17.
Application of Proportional Combustion Technology in Super Large-Scale Car Type Heating Furnace
比例燃烧技术在超大型台车加热炉上的应用
18.
In an adiabatic system, this heat release serves to increase the chamber temperature.
在一绝热系统中，放出的热量增加了燃烧室的温度。